Sony EditStation ES-7 Operating Instructions Manual Download Page 107

Page: 107 / 116

Appendixes

107

Appendixes

The EditStation displays an error message when a
problem occurs.
The meaning of the error messages and the steps to
take to correct the problem are as follows. If the

Appendix

Error Messages

problem persists after you have taken the steps
indicated below, contact your Sony dealer or Sony
service representative.

Message

Meaning

Steps to Take

Couldn’t initialize graphics device. A graphics device initialization

error occurred.

Shut the system down and launch EditStation again
after restarting the system.

MARK IN necessary.

An IN point setting is required.

Click the MARK IN button to set an IN point.

MARK OUT necessary.

An OUT point setting is required.

Click the MARK OUT button to set an OUT point.

Delete all clips?

An operation that will delete all
clips is about to be performed.

If you really want to delete all clips, click the Yes
button.
Otherwise click the No button.

Can’t close device.

A graphics board access error
occurred.

Shut the system down and launch EditStation again
after restarting the system.

Can’t get pixel clock.
Check cable between graphics
board and PC.

The cable between the graphics
board and PC may be loose.

Check the cable connection on the VPR board.

For the location of the VPR board, see page 76.

Can’t open device. Check
whether other process is using
graphics board.

A graphics board access error
occurred.

Shut the system down and launch EditStation again
after restarting the system.

Mismatch between Device ID and
DLL. Use correct DLL.

A graphics board access error
occurred.

Shut the system down and launch EditStation again
after restarting the system.

Invalid mode.

A graphics board access error
occurred.

Shut the system down and launch EditStation again
after restarting the system.

Can’t map physical memory.

A graphics board access error
occurred.

Shut the system down and launch EditStation again
after restarting the system.

Can’t unmap physical memory.

A graphics board access error
occurred.

Shut the system down and launch EditStation again
after restarting the system.

Summary of Contents for EditStation ES-7





















































































































Search results

Summary of Contents for EditStation ES-7

Reviews:

Related manuals for EditStation ES-7

Brands by name

Popular brands

Sony EditStation ES-7, Operating Instructions Manual

Search results

Summary of Contents for EditStation ES-7

Reviews:

Related manuals for EditStation ES-7

Brands by name

Popular brands