![background image](http://html.mh-extra.com/html/sony/dynaview-ssc-dc593/dynaview-ssc-dc593_service-manual_392759021.webp)
3-3
SSC-DC593/DC593P/DC598P (E)
Adjusting commander relay tool
E1
TP6
S101
S102
S103
Start selection.
Is the initial writing
of data required?
(Note)
Make adjustment of camera.
Adjustment is completed.
Start the initial writing of data.
(Refer to Section 3-2-2.)
Yes
No
(Note) The initial writing of data is
required when IC306 (PR-269
board) is replaced.
3-1-4. Adjustment Commander Relay Tool
Set the slide switch of the adjustment commander relay
tool before making adjustment. (Refer to Section 3-2-1.)
S101: WRT/ADJ
S102: LOW/HI
S103: PAL/NTSC
The signal required for adjustment can be obtained from
the test pin of the adjustment commander relay tool.
TP6: VCO CONT
E1:
GND
3-1-5. Selection Flowchart of Adjustment
Required Items
3-2. Adjustment Procedure
3-2-1. Preparation for Adjustment
1.
Setting of switches
.
Set the DIP switch on the rear panel to LL.
.
Slide the slide switch (HOLD) on the upper part of
the commander to the right side.
.
Set the slide switches of adjustment commander
relay tool as follows
NTSC (SSC-DC593):
NTSC, LOW, ADJ
PAL (SSC-DC593P/DC598P): PAL, LOW, ADJ
2.
Connection of commander
Connect the commander to the connector (CN202) on
the PR-269 board using the adjustment commander
relay tool (CN103). At that time, align pin 1 of the
adjustment commander relay tool with pin 1 (on the
rear panel side) of the connector.
3.
Turn on the power of the unit.
Summary of Contents for DynaView SSC-DC593
