Sony DynaView SSC-DC593, Service Manual

Page: 10 / 72

1-2
SSC-DC593/DC593P/DC598P (E)
B 2
x
4
B 2
x
4
PR-269 board
Front assembly
CN201
CN3
Flexible flat cable
Harness
DC power
(The illustration indicates SSC-DC593.)
1-2-2. Front Assembly
1. Remove the upper case. (Refer to Section 1-2-1)
2. Remove the four screws, then remove the front
assembly in the direction indicated by the arrow.
3. Disconnect one flexible flat cable from the connector
(CN201) on the PR-269 board.
4. Disconnect one harness from the connector (CN3) on
the AC/DC power supply.
5. Attach the front assembly in the reverse order of steps
1 to 4.
PR-269 board
B 2
x
3
B 2
x
4
Projections
Holes
CN602
CN601
CN1
Harnesses
Rear
assembly
CT-221 board
AC/DC power supply
(The illustration indicates SSC-DC593.)
1-2-3. Rear Assembly
For SSC-DC593/DC593P
1. Remove the upper case. (Refer to Section 1-2-1)
2. Remove one screw (B 2
x
3) and one screw (B 2
x
4),
then remove the rear assembly in the direction
indicated by the arrow.
3. Disconnect the three harnesses from the connector
(CN1) on the AC/DC power supply and the connectors
(CN601 and CN602) on the CT-221 board.
4. Attach the rear assembly in the reverse order of steps 1
to 3.
n
When attaching the rear assembly, align the two
projections of the PR-269 board with the two holes of the
CT-221 board and attach it securely.