Sony DXC-390, Service Manual, Page: 11 / 110

1-5 (E)
DXC-390/390P
8
(GB) Chapter 1 Overview
Chapter 1
Location and Functions of Parts and Controls
2 Screw holes (M3)
Front Panel/Top Panel/Bottom Panel
1 Lens Mount (C-mount)
Attach a C-mount lens or microscope adaptor.
Note
Be sure to use a lens whose projected part from the lens
mount surface is less than 4.3 mm. Mounting the lens with a
projected part greater than 4.3 mm may damage the internal
mechanism of the camera.
2 Screw holes
Use these holes (M3, depth: 4 mm ( 3 /
16
inches)) to attach the
supplied tripod adaptor to the camera for mounting the
camera on a wall, ceiling or tripod.
For how to install the tripod adaptor, see “Mounting on a
Tripod” on page 45.
1 Lens mount
2
Screw holes (M3)
Chapter 1 Overview
9
(GB)
Chapter 1
Right Side Panel (Control Panel)
1
MENU button
2
V
/BLACK button
3
b
/ WHITE button
4 BARS button
5 ENTER button
6
v
button
7
B
/FILE SELECT button
8 FLANGE BACK (flange focal
length) adjustment ring
1
MENU button
Displays the MAIN menu on a monitor screen. Press again
to exit the menu. When a setting menu is displayed, press
this button to return to the MAIN menu.
For menu operations, see “Operation through Menus” on
page 14.
2
V
/BLACK (black balance) button
While the menu is displayed: Moves the menu cursor
upward. Also use this button for an AE window setting,
etc.
While the normal screen is displayed: Activates the
automatic black balance adjustment.
3
b
/ WHITE (white balance) button
While the menu is displayed: Increases the setting value or
changes the setting. Also use this button for an AE
window setting, etc.
While the normal screen is displayed: Activates the
automatic white balance adjustment when MODE is set
to AWB in WHITE BALANCE menu.