77
DVP-CX995V
Pin No.
Pin Name
I/O
Description
46
OUTSW
I
Disc tray open detection signal input terminal "H": Disc tray is closed
Fixed at "H" in this set
47
DGND
-
Ground terminal (digital system)
48
VDD18
-
Power supply terminal (+1.8V) (digital system)
49, 50
PD (6), PD (5)
O
Internal signal monitor output terminal Not used
51
DSPCLK
O
Internal signal monitor output terminal Not used
52
DSPDAT
O
Internal signal monitor output terminal Not used
53
DSPSTRB
O
Internal signal monitor output terminal Not used
54, 55
PD (1), PD (0)
O
Internal PDM signal monitor output terminal Not used
56
VSS
-
Ground terminal (digital system)
57
VDD33
-
Power supply terminal (+3.3V) (digital system)
58
OUT-ERR
O
Error signal output to the CPU
59
OUT-EVALID
O
Word clock signal output to the CPU
60
VSS
-
Ground terminal (digital system)
61
OUT-CLK
O
Bit clock signal output to the CPU
62
VDD18
-
Power supply terminal (+1.8V) (digital system)
63
OUT-DVALID
O
PCLK signal output to the CPU
64
OUT-DATA
O
Serial audio/video data output to the CPU
65
OUT-SYNC
O
Error signal and V4 signal output to the CPU
66
SCL
I
I2C bus clock signal input from the CPU
67
SDA
I/O
I2C two-way data bus with the CPU, interlace/progressive converter, video D/A converter and
HDMI transmitter
68, 69
PE (3), PE (2)
-
Not used
70
SPDIR
I
Spindle motor rotation direction detection signal input from spindle motor driver
"L": reverse direction, "H": forward direction
71
IRQ_FE
O
Interrupt request signal output to the CPU
72
VSS
-
Ground terminal (digital system)
73
VDD33
-
Power supply terminal (+3.3V) (digital system)
74
PF (1)
O
Internal signal monitor output terminal Not used
75
DSPSTRB2
O
Internal signal monitor output terminal Not used
76
VSS
-
Ground terminal (digital system)
77
VDD18
-
Power supply terminal (+1.8V) (digital system)
78
PG (1)
I
Boot mode selection mode signal input terminal "L": standalone mode, "H": EMU mode
Fixed at "L" in this set
79
PG (0)
I
Boot mode selection mode signal input terminal "H": standalone/EMU mode
Fixed at "H" in this set
80
TEST
I
Input terminal for the test
81
RESET_N
I
Reset signal input from the CPU "L": reset
82
VSSADC
-
Ground terminal (analog system)
83
VDD18ADC
-
Power supply terminal (+1.8V) (analog system)
84
GNDPLL
-
Ground terminal (analog system)
85
CKOUT
-
Not used
86
FREOUT
-
Not used
87
FREIN
O
27 MHz clock signal input terminal
88
VCC18PLL
-
Power supply terminal (+1.8V) (analog system)
89
LD1
O
Laser diode control signal (for DVD) output terminal
90
LD2
O
Laser diode control signal (for CD) output terminal
91
VCCA33
-
Power supply terminal (+3.3V) (analog system)
