Chapter 5
Connections and Settings
43
Chapter 5
Connections and Settings
Connections for an A/B Roll Editing System
The following is an example configuration of A/B roll
editing system using the DSR-60/60P and DSR-85/
85P.
In this configuration, the DSR-60/60P is used as player
1, the UVW-1600/1600P (an analog Betacam
videocassette player) as player 2, and the DSR-85/85P
as recorder. To create a final tape (a tape that contains
a completely packaged program) in Betacam format,
you can use a Betacam VCR such as the UVW-1800/
1800P as the recorder.
The purpose of the following figure is to clearly
indicate the flow of signals among the component
devices in this system. The specific connections and
DSR-60/60P settings for this system are described on
the following pages.
a) When using a DFS-500/500P DME Switcher, the phase of the
video signals processed by the DFS-500/500P is delayed,
which means that a delay unit must be connected between the
MXP-290 Audio Mixer’s output and the audio input in the DSR-
85/85P (recorder).
Audio monitor system
Source video
monitor
DSR-85/85P
(recorder)
DPS-D7 or other
delay unit
a)
MXP-290 Audio
Mixer
PVE-500, etc
(Editing controller)
Main video monitor
Video signal generator
(Sony Tektronix TSG-
130, etc.)
DFS-500/500P
DME Switcher
DSR-60/60P (player 1)
Video signal
Audio signal
Reference video signal
Control signal
UVW-1600/
1600P
(player 2)
)
0
6
r
p
)
0
6
p
