Sony DSX-M50BT, Service Manual

Page: 25 / 34

DSX-M50BT
25
MAIN BOARD IC201 LC786800E-06US-H
(USB CONTROLLER, INPUT SELECTOR, AUDIO DSP, ELECTRICAL VOLUME)
Pin No. Pin Name I/O Description
1 LFOUT O Audio signal (front L-ch) output terminal
2 LROUT O Audio signal (rear L-ch) output terminal
3 LVRIN I Audio signal (L-ch) input terminal
4 DACOUT_L O Audio signal (L-ch) output terminal
5 DACOUT_R O Audio signal (R-ch) output terminal
6 RVRIN I Audio signal (R-ch) input terminal
7 RROUT O Audio signal (rear R-ch) output terminal
8 RFOUT O Audio signal (front R-ch) output terminal
9 L1_IN I Audio signal (tuner L-ch) input terminal
10 R1_IN I Audio signal (tuner R-ch) input terminal
11 L2_IN I Audio signal (Bluetooth L-ch) input terminal
12 R2_IN I Audio signal (Bluetooth R-ch) input terminal
13 L3_IN_P I Audio signal (AUX L-ch) input terminal (positive)
14 L3_IN_N I Audio signal (AUX L-ch) input terminal (negative)
15 R3_IN_P I Audio signal (AUX R-ch) input terminal (positive)
16 R3_IN_N I Audio signal (AUX R-ch) input terminal (negative)
17, 18
ATEST01 (OPN),
ATEST02 (OPN)
- Analog test terminal Not used
19 VREFOUT O External reference voltage output terminal
20 VREF_ADC - External capacitor connection terminal for audio A/D converter reference voltage
21 AVSS2 - Ground terminal (for A/D converter)
22 AVDD2 - Power supply terminal (+3.3V) (for A/D converter)
23 to 30 NC - Not used
31 DVDD - Power supply terminal (+3.3V) (for digital system)
32 DVSS - Ground terminal (for digital system)
33 to 40 NC - Not used
41 DVDD - Power supply terminal (+3.3V) (for digital system)
42 DVSS - Ground terminal (for digital system)
43 REG1_EXTR (OPN) - Internal regulator reserve terminal Not used
44 DVDD15 - External capacitor connection terminal for internal regulator
45 iTXD O Serial data output terminal Not used
46 iRXD I Serial data input terminal Not used
47 SMONI O Watch-dog timer status monitor output to the system controller
48 NC - Not used
49 DVDD - Power supply terminal (+3.3V) (for digital system)
50 DVSS - Ground terminal (for digital system)
51 RESETB I Reset signal input from the system controller “L”: reset
52 SIFCK I Serial data transfer clock signal input from the system controller
53 SIFDI I Serial data input from the system controller
54 SIFDO O Serial data output to the system controller
55 SIFCE I Chip enable signal input from the system controller
56 BUSYB O Busy signal output to the system controller “L”: busy
57 to 61 NC - Not used
62 USBINS1 O USB device detection signal output to the system controller “L”: USB device is connected
63 to 65 NC - Not used
66 DVSS - Ground terminal (for digital system)
67 DVDD - Power supply terminal (+3.3V) (for digital system)
68 UDM1 I/O Two-way USB data (–) bus with the USB connector
69 UDP1 I/O Two-way USB data (+) bus with the USB connector
70 DVSS - Ground terminal (for digital system)
71 UDM2 I/O Two-way USB data (–) bus terminal Fixed at “L” in this unit
72 UDP2 I/O Two-way USB data (+) bus terminal Fixed at “L” in this unit
73 XVDD - Power supply terminal (+3.3V) (for oscillation circuit)
74 X12IN I System clock input terminal (12 MHz)
75 X12OUT O System clock output terminal (12 MHz)
76 XVSS - Ground terminal (for oscillation circuit)
77 AFILT O Charge pump output terminal (for audio PLL)