3-2
DPP-FP95
3-1. SERVICE MODE
Note on the service mode screen:
The selected item on the screen displayed in the service mode is
framed by “yellow frame”. In this manual, the yellow frame is
referred to as “frame”.
3-1-1. STARTUP/QUITTING PROCEDURE
Note on starting the service mode:
• Do not use the mode that is not described in this manual.
• Perform the operation in each mode according to the operation
procedure in this manual.
Connection procedure:
1.
Insert one power cord plug into the AC adapter (AC-S2422)
supplied with the DPP-FP95 (hereafter, referred to as this unit)
and insert the other power cord plug into the receptacle.
2.
Insert the DC plug of the supplied AC adapter into the DC-IN
terminal of this unit.
Procedure:
1.
Press the [ON/STANDBY] button while pressing the [ENTER]
and [CANCEL] buttons simultaneously.
2.
Release all buttons when the initial screen of the service mode
is displayed.
3.
Select each mode except the USB Test mode, by using the
DIRECTION buttons (
f
,
F
) (framed item) and press the
[ENTER] button.
4.
Press the [CANCEL] button to return to the startup screen of
the service mode while any test mode other than the Button
Test is running.
5.
Press the [ON/STANDBY] button to quit the service mode
while any test mode other than the Button Test is running.
(POWER OFF)
