Sony DNW-75, Operation Manual

Page: 94 / 120

Chapter 7
Menu System
7-14
Chapter 7 Menu System
7-3 Extended Menu
Menu items in the 300s, relating to editing operations (Continued)
Menu items in the 400s, relating to preroll
a) When controlled from an editor (BVE-2000/9100 etc.), selecting “REEL” allows high-speed cuing up.
Item number Item name Settings
401
FUNCTION MODE
AFTER CUE-UP Select the state that the unit goes into after a cuing-up operation.
STOP : Stops (the “STOP mode”).
STILL: Still playback (in search mode).
Note
When controlling this unit from an editor with the standard constants set, select
“STOP”.
402 TIME REFERENCE FOR
PREROLL When prerolling a tape with timecode discontinuities, select whether or not to use
CTL pulses to count timecode from before a discontinuity.
CTL : Use CTL pulses to count timecode.
TC: Do not use CTL pulses to count timecode.
403 AUTOMATIC PREROLL
REFERENCE ENTRY Select whether or not the edit IN point is automatically set by pressing the
PREROLL button, when the IN point is not set before starting preroll.
DIS : IN point is not set automatically.
ENA: IN point is set automatically.
318 EDIT RETRY For two-VTR editing, set when this unit is used as the recorder. Selects the
operation if the recorder was not synchronized in time.
OFF: Editing is not carried out, and the unit stops.
ON : The editing is automatically retried (up to twice).
319 PREREAD SELECT Specify the preread operation.
A/V : Preread for both audio and video.
AUDIO: Preread for audio only.
VIDEO: Preread for video only.
The preread operation can be controlled with the PREREAD button on the control
panel or from the 9-pin remote control interface.
Item number Item name Settings
320 DIGITAL AUDIO
PROCESS ON EDIT
POINT Select the treatment of audio at edit points.
CUT: Carry out a cut (possibly resulting in audio discontinuities at the edit point).
FADE : Fade out and fade in.
326 AUTOMATIC IN ENTRY
AFTER AUTO EDIT Select whether or not to automatically set the OUT point of the previous edit as
the next IN point at the end of an automatic edit.
OFF : No automatic setting.
R: Set recorder IN point automatically.
R & P: Set recorder IN point automatically, and also player IN point in two-VTR
editing.
405 CUEUP BY CTL Select the tape transport mode when cuing. This setting is valid only when the
CTL/TC/UB button on the lower control panel is set to CTL.
CAP : During cuing up, the tape transport is in the “pinch ON” state (maximum
tape speed 10 times normal).
REEL : During cuing up, the tape transport is in the “pinch OFF” state. As the
tape approaches the cue up point and the tape speed drops, the tape transport
switches to the “pinch ON” state.
a)
To give priority to editing accuracy, select “CAP”.