Sony DNW-75, Operation Manual, Page: 90 / 120

Chapter 7
Menu System
7-10
Chapter 7 Menu System
7-3 Extended Menu
Menu items in the 100s, relating to the control panels (Continued)
Item number Item name
Settings
111 TSO/FEED PLAY Select whether to enable tape speed override mode or feed play mode.
DIS : Disable both tape speed override mode and feed play mode.
TSO: Enable tape speed override mode.
FEED: Enable feed play mode.
116 JOG DIAL RESPONSE Select the tape speed characteristics for the jog dial rotation rate (VTR
commands).
TYPE1 : Tape speed varies linearly over the range –1 to +1.
TYPE2: Tape speed varies stepwise as shown in the figure below
a) over the
range –3 to +3. (Characterized by a zone around –1 and +1 where the tape
speed is independent of the rotation rate)
TYPE3: Tape speed varies linearly over the range –3 to +3, as shown in the
figure below b) .
TYPE4: Tape speed varies stepwise as shown in the figure below c) over the
range –2 to +2. (Characterized by a zone around –1 and +1 where the tape
speed is independent of the rotation rate)
117 CONTROL PANEL
SELCTION Select the control panel function when the CONTROL PANEL switch on the
subsidiary control panel is set to EXT.
SW : Only the control panel connected to the external control connector on the
connector panel functions.
PARA : Both the control panel connected to the external control connector and
the control panel of this unit function.
a) b) c)
+3
+1
-1
-3
FWD
FWD
RVS
RVS
+2
+1
-1
-2
FWD
FWD
RVS
RVS
+3
-3
FWD
FWD
RVS
RVS
Speed
(reverse)
Rotation rate
TYPE 2 TYPE 3 TYPE 4
Speed Speed
Rotation rate Rotation rate
120
118 KEY INHIBIT SWITCH
EFFECTIVE AREA Select which switches and buttons can be operated when the KEY INHIBIT
switch on the subsidiary control panel is set to ON. The following sub-items
control different sets of switches and buttons independently.
REMOTE
SELECT
Sub-item
Select whether the REMOTE 1 and 2 buttons in the upper control panel is
enabled.
DIS : Disabled.
ENA: Enabled.
118-2 MON./ INPUT
SEL
118-1
Select whether the audio signal selection buttons in the upper control panel are
enabled.
DIS : Disabled.
ENA: Enabled.
118-3 CONTROL
PANEL Select which switch and button operations can be carried out from the control
panel of this unit or an external control panel connected to this unit.
DIS : All switches and buttons are disabled.
EDIT: All switches and buttons for editing operations are disabled.
ENA: All switches and buttons are enabled.
119 VARIABLE SPEED LIMIT
IN KEY PANEL CONTROL Select the playback speed range when carrying out playback in variable mode
from the control panel of this unit.
OFF : –1 to +2 times normal speed.
ON: 0 to +1 times normal speed.
CTL LOCK IN VAR/SHTL Select whether the tape transport should be phase-locked to the CTL signal
during playback in variable or shuttle mode.
OFF : Not phase-locked.
ON: Phase-locked at the following speeds: –1, –0.5, 0.5, 1.0 and 2.0 times
normal.