5-50
7. CAP FG Offset Adjustment (VC-213 board)
Improve the capstan servo characteristic. If it is not correct. jitters
will increase.
Mode
Playback
Signal
Hi8/standard 8mm alignment tape :
For checking operation
(WR5-5NSP(NTSC))
(WR5-5CSP(PAL))
Measurement Point
Pin
!∞
of CN910 (CAP FG)
Measuring Instrument
Oscilloscope
Adjustment Page
F
Adjustment Address
61
Specified value
Duty = 50 ± 1 %
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: 2, address: 2E, and set data: 02.
3)
Set to the playback mode.
4)
Select page: 6, address: 01, set data: 81, and press the PAUSE
button of the adjustment remote commander. (to start up
automatic CAP FG offset adjustment.)
5)
Select page: 6, address: 02, and check that the data is “01”.
6)
Check that Duty of CAP FG signal satisfies the specified value.
If not, select page: 6, address: 01, set data: 00, and press the
PAUSE button, and then, repeat steps 4) to 6).
7)
Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
8)
Select page: 2, address: 2E, and set data: 00.
9)
Select page: 0, address: 01, and set data: 00.
Fig. 5-3-8.
A
B
Duty = A/B
×
100 [%]
Center of movement
Summary of Contents for Digital8 DCR-TRV410
