![background image](http://html.mh-extra.com/html/sony/dhc-md5/dhc-md5_operating-instructions-manual_420517046.webp)
DHCMD5 3-858-047-12.EN (1)
46
Specifications
Amplifier section
DIN power output
40 W + 40 W
(6 ohms, at 1 kHz, DIN)
Continuous RMS power output
50 + 50 watts
(6 ohms at 1 kHz,
10% THD)
Music power output
160 watts
Inputs
VIDEO/GAME IN
(phono jacks)
(switchable)
VIDEO IN:
voltage 250 mV,
impedance 47 kilohms
GAME IN:
voltage 450 mV,
impedance 47 kilohms
TAPE IN (phono jacks):
voltage 250 mV,
impedance 47 kilohms
Outputs
TAPE OUT (phono jacks):
voltage 250 mV
impedance 1 kilohms
PHONES (stereo phone jack):
accepts headphones of 8
ohms or more.
SPEAKER:
accepts impedance of 6 to
16 ohms.
CD player section
System
Compact disc and digital
audio system
Laser
Semiconductor laser
(
λ
=780nm)
Emission duration:
continuous
Laser output
Max. 44.6
µ
W*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
Frequency response
2 Hz – 20 kHz (±0.5 dB)
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
No Track
The inserted MD has a disc title but no
tracks.
OVER
You have reached the end of the last track
during high-speed search.
Protected
The inserted MD is protected against
erasure.
Retry
The MD deck is redoing the recording
because of vibrations or disc scratches
encountered during recording.
Retry Error
Due to vibration affecting the deck or
scratches on the MD, several recording
attempts were made but with no success.
Smart Space
The signal was input again after silence
continued for 3 to 30 seconds or less during
digital recording.
Sorry
You tried to combine tracks that cannot be
combined.
Troubleshooting (continued)