![background image](http://html.mh-extra.com/html/sony/dhc-md5/dhc-md5_operating-instructions-manual_420517035.webp)
DHCMD5 3-858-047-12.EN (1)
35
6
Press CHARACTER repeatedly
until the desired sort of character
appears.
Each time you press the button, the
display changes as follows:
A (Upper cases)
n
a (Lower cases)
n
0
(Numbers)
n
! (Symbols)*
n
(Space)
n
A…
*You can use the following symbols.
7
Turn MULTI JOG until the desired
character appears.
To enter a blank space, press
CURSOR
n
while the cursor is
flashing.
8
Press CURSOR
n
.
The cursor shifts rightward and starts
flashing.
9
Repeat steps 6 to 8 to complete the
name.
If you made a mistake, press
CURSOR
N
or
n
until the
character you want to change
flashes, then repeat steps 6 to 8.
10
Press ENTER/YES.
To cancel labelling
Press
π
on the MD deck.
To erase the name
Repeat steps 1 to 5, then press EDIT/NO
repeatedly until all the letters are erased.
Using the Radio Data
System (RDS)
What is the Radio Data
System?
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
programme signal. This tuner offers
convenient RDS features, such as monitoring
and locating a station by programme type.
RDS is available only on FM stations*.
Note
RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly
or if the signal strength is weak.
* Not all FM stations provide RDS service, nor do
they provide the same types of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
Receiving RDS broadcasts
Simply select a station from the FM
band.
When you tune in a station that provides
RDS services, the station name appears
in the display.
continued
!"#$%&'()
∗
+,–./:;<=>?@_`
(Space)