91
Troubleshooting
DCR-DVD7
2-597-462-11(1)
For Windows 2000
1
Click [Start], [Settings], then [Control Panel].
2
Click [System].
The [System Properties] window appears.
3
Click the [Hardware] tab.
4
Click [Device Manager].
The [Device Manager] window appears.
5
Make sure that [SONY DDX-C1000 USB Device] appears in [DVD/CD-ROM drives],
[Generic volume] in [Storage volumes], and [USB Mass Storage Device] in [Universal
Serial Bus controllers] respectively.
When all the devices appear, the USB driver is installed correctly. If any of these devices
are not shown, install the USB driver.
Place the supplied CD-ROM in the disc drive on your computer.
Double-click [My Computer].
Right-click [PICTUREPACKAGE] icon (Disc drive)*, then click [Open].
*Drive names (such as (E:)) may vary depending on the computer.
Double-click [Driver]
[Setup. exe].
An error message appears when you place the supplied CD-ROM in your
computer.
•
Set the computer display as follows:
– Windows: 800 × 600 dots or more, High Color (16 bits, 65 000 colors) or more
You cannot use the supplied CD-ROM on a Macintosh computer.
•
The supplied CD-ROM is not compatible with a Macintosh computer.
