Sony Cyber-shot DSC-P51, Service Manual

Page: 90 / 117

DSC-P51/P51M
5-29
Order Page Address Data Procedure
17 Check the flashing.
18 6 02
Check the data changes to
“01”.
19 6 01 00 Press PAUSE button.
20 6 01 67 Press PAUSE button.
21 Check the flashing.
22 6 02
Check the data changes to
“01”.
23 6 01 00 Press PAUSE button.
24 6 01 67 Press PAUSE button.
25 Check the flashing.
26 6 02
Check the data changes to
“01”.
27 6 01 00 Press PAUSE button.
28 6 01 B9 Press PAUSE button. (Note 6)
29 Check the flashing.
30 6 02
Check the data changes to
“01”.
31 6 01 00 Press PAUSE button.
32 6 01 E7 Press PAUSE button. (Note 6)
33 Check the flashing.
34 6 02
Check the data changes to
“01”.
35 F
EA Check that the displayed data
EC satisfies the Y level specified
EE value.
36 Wait for 1 second.
37 0 03 2C
38 1
Check that the R-Y level data
(Note 4) satisfied the
specified value.
39 0 03 2D
40 1
Check that the B-Y level data
(Note 4) satisfied the
specified value.
Note 6:
The adjustment data will be automatically input to page:
F, address: B6 to B7 and DB to EF.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE button.
2 6 90 00
3 6 91 00
4 6 92 00
5 6 93 00
6 6 2C 00
7 6 6C 00
8 0 03 00
9
Release the data setting
performed at step 1.
(Refer to page 5-13)
19. Strobe White Balance Adjustment
RadarW RadarW RadarW RadarW RadarW
Adjust the white balance when the strobe light flashed.
Mode CAMERA
Subject Flash adjustment box (Note 3)
(1 m from the front of lens)
Measurement Point Displayed data of page: 1 (Note
4) and page: F, address: E8, EA,
EC, EE
Measuring Instrument Adjusting remote commander
Adjustment Page F
Adjustment Address B6, B7, DB to EF
Specified Value Y level data: 03 to 07
R-Y level data:
007A to 0086 (Note 4)
B-Y level data:
007A to 0086 (Note 4)
Note 1:
Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 2: Perform this adjustment in the Flash adjustment box.
Note 3:
Refer to “4. Preparing the Flash adjustment box”.
(See page 5-7)
Note 4: The right four digits of the page: 1 displayed data of the
adjusting remote commander.
1:XX:XX
Displayed data
Note 5:
“Strobe White Balance Adjustment” is available only
once after the power is turned on. Turn the power off,
then on again if the adjustment is retried.
Switch setting:
1) FLASH (Control button) .............. ON
Adjusting method:
Order Page Address Data Procedure
1
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-13)
2
Perform “Picture Frame
setting ”. (Refer to page 5-
14)
3 6 2C 01
4 6 90 00
5 6 91 00
6 6 92 FF
7 6 93 FF
8 6 6C 01
9 6 01 79 Press PAUSE button.
10 6 07
Check the data changes to
“01”.
11 6 01 67 Press PAUSE button.
12 Check the flashing.
13 6 02
Check the data changes to
“01”.
14 F E8
Check that the displayed data
satisfies the Y level specified
value.
15 6 01 00 Press PAUSE button.
16 6 01 67 Press PAUSE button.