manualshive.com logo in svg

Sony CMT-SP55MD, Operating Instructions Manual, Page: 67 / 72

Share
Download
Sony CMT-SP55MD Operating Instructions Manual Download Page 67

Additional Information

67

C14/Toc Error

The MD deck cannot read the disc information
properly.

c

Replace the MD.

c

Erase all the recorded contents of the MD
using the All Erase function (see page 39).

C41/Cannot Copy

The sound source is a copy of a commercially
available music software, or you tried to record
a CD-R (Recordable CD).

c

The Serial Copy Management System
prevents making a digital copy (see page 63).
You cannot record a CD-R.

C71/Check OPT-IN

This appears momentarily because of the signal
of the digital broadcast during recording.

c

There is no affect on the recorded contents.

No component is connected to the DIGITAL
OPTICAL IN jack, or a digital component is
not connected properly.

c

Connect a digital component to the DIGITAL
OPTICAL IN jack properly using a digital
connecting cable (an optical cable) (not
supplied, see page 57).

The connected digital component is not turned
on.

c

See the operating instructions supplied with
the connected component and confirm
whether the component is turned on.

The digital connecting cable (an optical cable)
connected to the DIGITAL OPTICAL IN jack
is pulled out, or the connected digital
component is turned off during digital
recording.

c

Connect the cable, or turn on the digital
component.

Self-diagnosis Display

This system has a Self-diagnosis display function
to let you know if there is a system malfunction.
The display shows a code made up of three letters
and a message alternately to show you the
problem.  To solve the problem refer to the
following list.  If any problem persists, consult
your nearest Sony dealer.

C11/Protected

The MD is protected against erasure.

c

Remove the MD and slide the tab to close the
slot (see page 22).

C12/Cannot Copy

You tried to record a CD or MD with a format
that the system does not support, such as a CD-
ROM.

c

Remove the disc and turn off the system once,
then turn it on again.

C13/REC Error

Recording could not be performed properly.

c

Move the system to a stable place, and start
recording over from the beginning.

The MD is dirty or scratched, or the MD does
not meet the standards.

c

Replace the MD and start recording over from
the beginning.

C13/Read Error

The MD deck cannot read the disc information
properly.

c

Remove the MD once, then insert it again.

Summary of Contents for CMT-SP55MD









































































Reviews:

No comments