Sony CMT-SP55MD Operating Instructions Manual Download Page 49

Page: 49 / 72

Tuner

Tips

• You can switch from another source to the tuner

just by pressing TUNER/BAND on the tuner
(

Automatic Source Selection

• To improve broadcast reception, adjust the supplied

aerials, or connect a commercially available
external aerial (see page 60).

• When an FM stereo programme has static noise,

press STEREO/MONO on the remote until
“MONO” appears. When receiving a monaural
broadcast, “MONO” lights up in the display. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
effect.

Labelling the preset
stations

— Station Name

You can label each preset station with up to 12
characters (Station Name). The Station Name
appears when you tune in the station.

`/1

3,6

4,5

3,6

CURSOR

CLEAR

Press BAND TUNER repeatedly to
select “AM” or “FM”.

Press TUNING MODE repeatedly until
“PRESET” appears.

Press

repeatedly until the

desired preset station to label appears.

continued

Summary of Contents for CMT-SP55MD









































































Search results

Summary of Contents for CMT-SP55MD

Reviews:

Related manuals for CMT-SP55MD

Brands by name

Popular brands

Sony CMT-SP55MD, Operating Instructions Manual

Search results

Summary of Contents for CMT-SP55MD

Reviews:

Related manuals for CMT-SP55MD

Brands by name

Popular brands