Sony CMT-SP55MD Operating Instructions Manual Download Page 40

Page: 40 / 72

While monitoring the sound, press

repeatedly to find the starting

point of the portion to be erased (point
A).

You can shift the starting point by 1/86
second (1 frame) intervals.
To shift the point by second or minute
intervals, press

so that “s” or

“m” flashes, then press

Repeat step 6 until point A is played
correctly.

Press ENTER/YES if point A is correct.

“MD Point B Set” appears and playback for
setting the ending point of the portion to be
erased (point B) starts.

Continue playback until the deck
reaches point B, then press ENTER/
YES.

“MD A-B Ers” and “MD Point B ok?”
appear alternately and the deck repeats a
portion of the few seconds before point A
and after point B successively.

Press

repeatedly to find

point B.

The procedure is the same as step 6.

Press ENTER/YES if point B is correct.

“MD Complete!!” appears for a few seconds
and the portion between point A and B is
erased.

To cancel A-B Erase

Press MENU/NO before completing the
procedure.

`/1

4,6,

4,5,8
9,

Press MD to switch the function to MD.

While playing an MD, press

at the

starting point of the portion to be erased
(point A).

The MD deck pauses for play.

Press MENU/NO to display “MD
Edit Menu”.

Press

repeatedly until

“MD A-B Erase ?” appears, then press
ENTER/YES.

Press ENTER/YES again.

“MD - Rehearsal -” and “MD Point A ok?”
appear alternately while the deck plays the
selected track from the beginning to point A.

Erasing recordings (continued)

Summary of Contents for CMT-SP55MD









































































Search results

Summary of Contents for CMT-SP55MD

Reviews:

Related manuals for CMT-SP55MD

Brands by name

Popular brands

Sony CMT-SP55MD, Operating Instructions Manual

Search results

Summary of Contents for CMT-SP55MD

Reviews:

Related manuals for CMT-SP55MD

Brands by name

Popular brands