Sony CMT-SP55MD Operating Instructions Manual Download Page 53

Page: 53 / 72

Timer/Other Features

To cancel the procedure

Press CLOCK/TIMER SET.

To change the setting

Start over from step 1.

To check the setting/activate
the timer

Press CLOCK/TIMER SELECT and press

repeatedly until “SEL DAILY” appears.

Then press ENTER/YES.
It is not necessary to set the start and stop times
every time.

To cancel the timer

Press CLOCK/TIMER SELECT and press

repeatedly until “TIMER OFF” appears.

Then press ENTER/YES.

Notes

• You cannot activate Daily Timer and recording

timer at the same time.

• Do not operate the system from the time the system

turns on until the play starts (about 30 seconds
before the preset time).

• If the system is on at the preset time, the set sound

source starts playing.

Press or – to adjust the
volume.

Press CLOCK/TIMER SET.

Press

repeatedly to display

“SET DAILY”, then press ENTER/
YES.

The hour indication flashes.

Set the time to start play.

Press

repeatedly to set the hour,

then press ENTER/YES.

The minute indication flashes.

Press

repeatedly to set the

minute, then press ENTER/YES.

The hour indication flashes again.

Set the time to stop play following the
procedure in step 5.

“OFF TIME NG” appears if the start time
and the stop time settings are the same.
Change the stop time.

Press

repeatedly to select

the desired sound source, then press
ENTER/YES.

The indication changes as follows:

TUNER

CD PLAY

TAPE PLAY*

MD PLAY

* Select this to use the optional tape deck

TC-SP55 as the sound source.

When you press ENTER/YES, the start time,
the stop time and the sound source appear in
turn, before the original display returns.
“DAILY” lights up.

Press

?/1

to turn off the system.

Summary of Contents for CMT-SP55MD









































































Search results

Summary of Contents for CMT-SP55MD

Reviews:

Related manuals for CMT-SP55MD

Brands by name

Popular brands

Sony CMT-SP55MD, Operating Instructions Manual

Search results

Summary of Contents for CMT-SP55MD

Reviews:

Related manuals for CMT-SP55MD

Brands by name

Popular brands