![background image](http://html.mh-extra.com/html/sony/cmt-se9/cmt-se9_operating-instructions-manual_420450057.webp)
M
D
–
Editin
g
57
GB
6
Press ENTER if point A is correct.
“Point B set” appears and playback for
setting the ending point of the portion to be
erased (point B) starts.
If the point A is incorrect,
press
.
or
>
repeatedly to find the starting point of
the portion to be erased (point A) while
monitoring the sound, then press ENTER.
You can shift the point by 1/86 second
(1 frame) intervals.*
* You can shift the point by 2-frame intervals (in
Monaural mode and LP2 stereo mode) or by
4-frame intervals (in LP4 stereo mode).
7
Continue playback until the deck
reaches point B, then press ENTER.
“A-B Ers” and “Point B ok?” appear
alternately and the deck repeats a portion of
the few seconds before point A and after
point B successively.
8
Press ENTER if point B is correct.
“Complete!” appears for a few seconds and
the portion between point A and B is erased.
Playback starts from the beginning of the
track.
If the point B is incorrect,
press
.
or
>
repeatedly to find the ending point of
the portion to be erased (point B) while
monitoring the sound, then press ENTER.
You can shift the point by 1/86 second
(1 frame) intervals.*
* You can shift the point by 2-frame intervals (in
Monaural mode and LP2 stereo mode) or by
4-frame intervals (in LP4 stereo mode).
Tip
To shift the point by minute or second intervals in steps
6 and 8, press
m
or
M
repeatedly to flash minute,
second, or frame indication, then press
.
or
>
.
You can use this function to change the order of
any track on the disc. When you move tracks,
the tracks are automatically renumbered.
Example: Moving track 3 to position 2
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO.
3
Press
.
or
>
repeatedly until
“Move?” appears, then press ENTER.
Playback starts.
4
Press
.
or
>
repeatedly until the
desired track number to move appears,
then press ENTER.
5
Press
.
or
>
repeatedly until the
new track position appears.
6
Press ENTER.
“Complete!” appears for a few seconds and
the moved track starts playing.
Note
When you move a track to a track number that is
registered into a group, the moved track is re-registered
into the group. In addition, if you move a track that is
registered into a group to a track number that is not
registered into a group, the group registration of the
moved track is released. However, when the Group
Function is on, you can only move tracks within the
selected group.
Minute
Second
Frame
Moving recorded tracks
— Move Function
1
2
3
1
2
3
4
4
A
B
C
D
C
B
D
A
Track number
Original
tracks
After
MOVE
Original track number
New track position
Summary of Contents for CMT-SE9
Page 111: ......
Page 112: ...Sony Corporation Printed in Korea ...