![background image](http://html.mh-extra.com/html/sony/cmt-se9/cmt-se9_operating-instructions-manual_420450063.webp)
Tu
n
e
r
63
GB
Other operations
Tips
• The preset stations are retained for about a day even
if you disconnect the mains lead or if a power failure
occurs.
• You can label the preset stations “Labelling the
• To improve the reception, adjust the supplied
antennas or connect an external antenna.
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 62).
1
Press TUNER BAND repeatedly (or
move TUNER lever on the DVD player
to FM or AM) to select “FM” or “AM”.
2
Press TUNING MODE repeatedly until
“PRESET” appears.
3
Press + or – (or move TUNER lever on
the DVD player to + or –) repeatedly to
select the desired preset station.
* The station name appears only if you have
labelled the station (see “Labelling the preset
stations” on page 64).
To select the desired preset
number using the number buttons
Press number buttons instead of performing
step 3. To enter preset number 10 or higher,
press >10 and the corresponding number
buttons. To enter 0, press 10/0.
In addition, you can select a preset number even
when the tuning mode is other than PRESET by
sel or – with the TUNER lever on the
DVD player.
To
Do this
Tune in a station
with a weak signal
Follow the procedure described
in “Manual tuning preset”.
Set another station
to the existing
preset number
Start over from step 1. After
step 5, press + or – (or move
TUNER lever on the DVD
player to + or –) repeatedly to
select the preset number you
want to store the other station.
Listening to the radio
Frequency
*
Preset number
continued
Summary of Contents for CMT-SE9
Page 111: ......
Page 112: ...Sony Corporation Printed in Korea ...