![background image](http://html.mh-extra.com/html/sony/cmt-se9/cmt-se9_operating-instructions-manual_420450039.webp)
MD
–
P
la
y
39
GB
Other operations
* While the Net MD function is on, you cannot switch
the function.
To play a track by entering the
track number
You can also select the track you want using the
remote during Normal Play.
Press the number button (s).
To enter a track number over 10
1
Press >10.
2
Enter the corresponding digits for the same
number of “–” flashing in the display.
To enter 0, press 10/0.
Example:
To enter track number 30, press >10, then press 3 and
10/0.
Playing repeatedly
— Repeat play
Press REPEAT repeatedly until “REP” or
“REP1” appears.
REP: For all the tracks on the MD up to five
times.
REP1: For a single track only.
To cancel Repeat Play
Press REPEAT repeatedly until both “REP” and
“REP1” disappear.
You can make a program of up to 25 steps.
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press PLAY MODE in stop mode
repeatedly until “PGM” appears.
3
Press
.
or
>
repeatedly until the
desired track number appears.
4
Press ENTER.
The track is programmed.
The step number appears, followed by the
track number in the programmed sequence
and the total playing time of the program.
5
To program additional tracks, repeat
steps 3 and 4.
6
Press MD
N
.
Program Play starts.
To
Do this
Stop play
Press
x
.
Pause
Press
X
. Press again to resume
play.
Select a track
Press
.
or
>
repeatedly
until you find the desired track.
Find a point in a
track
Keep pressing
m
or
M
(or
keep moving MD lever on the MD
deck to
.
or
>
) during
playback and release it at the
desired point.
Switch to MD
function from
another source*
Press MD
N
(Automatic Source
selection).
Remove the MD
Press
Z
MD on the MD deck.
Programming MD tracks
— Program Play
Selected track number
Total playing time
Last programmed
track number
Total playing
time
continued
Summary of Contents for CMT-SE9
Page 111: ......
Page 112: ...Sony Corporation Printed in Korea ...