![background image](http://html.mh-extra.com/html/sony/cmt-sbt40d/cmt-sbt40d_operating-instructions-manual_420446021.webp)
21
GB
Li
st
e
n
in
g
t
o
m
u
si
c t
h
ro
u
g
h
a
B
L
U
ET
O
O
T
H
co
n
n
e
c
tio
n
Pairing the system
with a BLUETOOTH
device and listening
to music
You can listen to music from BLUETOOTH
device over a wireless connection.
Before using the BLUETOOTH function,
perform pairing to register your BLUETOOTH
device.
Note
Place the BLUETOOTH device to be connected
within one meter of the system.
If your BLUETOOTH device is compliant with
touch (NFC), skip the next procedure. See
“Listening to music by one-touch action (NFC)”
(page 23).
1
Press BLUETOOTH MENU
.
If the BLUETOOTH function is selected
when the system has no pairing
information, the system enters the
pairing mode automatically.
You can also perform pairing by using a
button on the unit. See “To perform the
pairing by using a button on the unit”
(page 21).
2
Press
/
to select “PAIRING,”
then press
.
The system enters pairing mode.
“PAIRING” appears on the display
window
and the
(BLUETOOTH)
LED
blinks quickly.
3
Search for this system with the
BLUETOOTH device.
A list of the devices found may appear
on the BLUETOOTH device display.
4
Select [SONY:CMT-SBT40D] (this
system).
If prompted to enter a passkey on the
BLUETOOTH device, enter “0000.”
If this system is not shown in the
display window of the device, proceed
from step 1 again.
When pairing is completed, the
BLUETOOTH connection is established
automatically. “BT AUDIO” appears on
the display window
of the system
and the
(BLUETOOTH) LED
lights
up.
Perform this step within 5 minutes, or
the pairing is canceled. If the pairing is
canceled, proceed from step 1 again.
5
Press
.
Starts playback.
Depending on the BLUETOOTH device,
press
again. Also, you may have
to start up a music player on the
BLUETOOTH device.
6
Press /–
to adjust
the volume.
If the volume cannot be changed on
the system, adjust it on your
BLUETOOTH device.
To perform the pairing by using a
button on the unit
1
Press FUNCTION
repeatedly to select “BT
AUDIO.”
2
Press and hold FUNCTION
until the
(BLUETOOTH) LED
starts to blink fast.
The system enters pairing mode. “PAIRING”
appears on the display window
.
To establish a BLUETOOTH connection,
perform the same procedures after step 2
using a remote.
Tip
You can perform a pairing operation with
another BLUETOOTH device while the
BLUETOOTH connection is established with one
BLUETOOTH device.
Listening to music through a
BLUETOOTH connection