Sony CMT-L7HD - Micro Hi Fi Component System Operating Instructions Manual Download

Page: 51 / 68

M-crew

Setting up for Windows 98/
98SE

Installing the USB driver

Connect the system to the computer
directly, and then start up the
computer.

“Add New Hardware Wizard” appears.

Quit any applications that are active.

Click “Next”.

Select “Search for the best driver for
your device. (Recommended)”.

Load the Windows 98/98SE CD-ROM into
the CD-ROM drive of the computer if the
wizard requests it, and then install the
drivers. Installation procedure will be
repeated for each of the following device.

• Generic USB hub

Verifying the status of the installed

devices

Be sure to check the status of the installed
devices after you have installed thier drivers.

Open the Control Panel.

In the Start menu, point to “Settings” and
click “Control Panel”.

Double-click the “System” icon.

The “System Properties” dialog box
appears.

Click the “Device Manager” tab.

Make sure that the following items are
listed in the “Device Manager” dialog box.

• “SONY PCLK USB Driver”

• “Sony HDD Audio Recorder”* and

“Generic USB Hub” under “Universal
Serial Bus controllers”

* This appears only when the system is turned

on.

Click “OK” to close the “System
Properties” dialog box.

Setting up for Windows 2000/
Windows Me/Windows XP

Installing the USB driver (Windows

2000)

Connect the system to the computer
directly, and then start up the
computer.

“Found New Hardware Wizard” appears.

Quit any applications that are active.

Click “Next”.

continued

Summary of Contents for CMT-L7HD - Micro Hi Fi Component System





































































Search results

Summary of Contents for CMT-L7HD - Micro Hi Fi Component System

Reviews:

Related manuals for CMT-L7HD - Micro Hi Fi Component System

Brands by name

Popular brands

Sony CMT-L7HD - Micro Hi Fi Component System, Operating Instructions Manual

Search results

Summary of Contents for CMT-L7HD - Micro Hi Fi Component System

Reviews:

Related manuals for CMT-L7HD - Micro Hi Fi Component System

Brands by name

Popular brands