![background image](http://html.mh-extra.com/html/sony/cmt-j3md/cmt-j3md_operating-instructions-manual_420385048.webp)
48
Moving recorded tracks
— Move Function
You can use this function to change the order of
any track on the disc. When you move tracks, the
tracks are automatically renumbered.
E.g.: Moving track 3 to position 2.
1
2
3
1
2
3
4
4
x
.
>
H
`/1
X
M
m
2
3,4,6
3,4,5
3,4,5
1
1
Press MD to switch the function to MD.
Track
number
Original
tracks
After
MOVE
A
B
C
D
A
C
B
D
7
Repeat step 6 until point A is played
correctly.
8
Press ENTER/YES if point A is correct.
“Point B Set” appears and playback for
setting the ending point of the portion to be
erased (point B) starts.
9
Continue playback until the deck
reaches point B, then press ENTER/
YES.
“A-B Ers” and “Point B ok?” appear
alternately and the deck repeats a portion of
the few seconds before point A and after
point B successively.
10
Press
.
or
>
repeatedly to find
point B.
The procedure is the same as step 6.
11
Press ENTER/YES if point B is correct.
“Complete !!” appears for a few seconds and
the portion between point A and B is erased.
To cancel erasing
Press MENU/NO.
To return to the condition before
ERASE
You can return to the original condition
immediately after erasing the tracks (see page 52).
Note
If “Impossible” appears, the specified portion cannot
be erased. This happens when you have edited the
same track many times. This is due to a technical
limitation of the MD system and is not a mechanical
error.
Erasing recordings (continued)
Summary of Contents for CMT-J3MD
Page 79: ...Additional Information 79 ...