![background image](http://html.mh-extra.com/html/sony/cmt-j3md/cmt-j3md_operating-instructions-manual_420385032.webp)
32
Recording your favourite
CD tracks on an MD
— CD-MD Synchro Recording
You can select your favourite CD tracks with the
Programme Play feature, then record the
programme on an MD using the CD Synchro
Recording feature. If you use a partially recorded
MD, recording starts after the recorded tracks.
7
8,9
HS
HS
A
h
H
S
x
.
>
H
`/1
X
M
m
2
3
1
3
4
After recording
,
Press MD
A
to remove the MD or press
?/1
(power) to turn off the system.
“TOC” lights up, or either “TOC” or
“STANDBY” starts flashing. The TOC is
updated and recording is completed.
Before pulling out the mains lead
MD recording is completed when the MD Table
of Contents (TOC) is updated. The TOC is
updated when you eject the MD or press
?/1
to
turn off the system. Do not pull out the mains lead
before updating the TOC (while “TOC” is lit) or
while updating the TOC (while “TOC” or
“STANDBY” is flashing) to ensure a complete
recording.
Protecting a recorded MD
• To protect a recorded MD, slide the tab on the side
of the MD to open the slot. In this position, the MD
cannot be recorded. To record on the MD, slide the
tab to close the slot.
Tab
Slide the tab
• If the MD is record protected, “C11” and
“Protected” appear alternately and the MD cannot
be recorded. Remove the MD, then slide the record
protection tab to the closed position.
Before you start recording
(continued)
Summary of Contents for CMT-J3MD
Page 79: ...Additional Information 79 ...