![background image](http://html.mh-extra.com/html/sony/cmt-g2bnip/cmt-g2bnip_operating-instructions-manual_420353061.webp)
61
GB
Tr
ou
bl
esh
oot
in
g
,
Move the system away from any sources of noise.
,
Connect the system to a different wall outlet.
,
Install a noise filter (not supplied) to the power cord.
,
Remove any obstacles between the remote and the
remote sensor on the unit, and position the unit away
from fluorescent lights.
,
Point the remote at the sensor on the unit.
,
Move the remote closer to the system.
,
The batteries may be run down. Replace the batteries
with new ones.
,
The STANDBY indicator may not turn off
immediately after unplugging the power cord. The
indicator will turn off after about 40 seconds. This is
not a malfunction.
,
Wipe the disc clean, and replace it.
,
Move the system to a location away from vibration
(for example, to the top of a stable stand).
,
Move the speakers away from the system, or place
them on separate stands. At high volume, speaker
vibration may cause the sound to skip.
,
Return to Normal Play by pressing PLAY MODE
repeatedly until both “PGM” and “SHUF” disappear.
,
The following discs can increase the time it takes to
start playback:
• a disc recorded with a complicated tree structure.
• a disc recorded in multisession mode.
• a disc that has not been finalized (a disc to which
data can be added).
• a disc that has many folders.
,
Connect the antenna properly.
,
Find a location and an orientation that provide good
reception, and then set up the antenna again.
,
Keep the antennas away from the speaker cords and
the power cord to avoid picking up noise.
,
Turn off nearby electrical equipment.
,
Check all antenna connections, then perform the
DAB Initial Scan procedure (see “Performing a DAB
Initial Scan manually” (page 31)).
,
The current DAB/DAB+ service may not be
available. Press +/– to select a different service.
,
If you have moved to another area, some services/
frequencies may have changed and you may not be
able to tune into your usual broadcast. Perform the
DAB Initial Scan procedure to re-register the
contents of broadcasts. (Performing this procedure
clears all previously stored presets.)
,
Change the location of the system or adjust the
orientation of the antenna to increase the indicated
value of the signal quality. Refer to “Changing the
display settings” (page 59) for further details on the
signal quality.
,
Make sure the iPod/iPhone is connected securely.
,
Make sure the iPod/iPhone is playing music.
,
Make sure the iPod/iPhone is updated with the latest
software. If not, update the iPod/iPhone before using
with the system.
,
Adjust the volume.
,
Make sure the iPod/iPhone is connected securely.
,
Turn down the volume.
,
Set the “EQ” setting of the iPod/iPhone to “Off” or
“Flat.”
There is a severe hum or noise.
The remote does not function.
The STANDBY indicator remains lit after
unplugging the power cord.
CD/MP3 player
The sound skips, or the disc will not play.
Playback does not start from the first track.
Starting playback takes more time than usual.
Tuner
There is a severe hum or noise, or stations
cannot be received (“TUNED” or “ST” flashes
on the display).
The DAB/DAB+ radio station is not received
properly (CMT-G2BNiP only).
The DAB/DAB+ broadcast has been
interrupted (CMT-G2BNiP only)
iPod/iPhone
There is no sound.
The sound is distorted.
Summary of Contents for CMT-G2BNIP
Page 82: ...82GB ...
Page 83: ...83GB Precautions Specifications ...
Page 84: ... 2011 Sony Corporation Printed in China 4 299 598 14 1 ...