Sony CMT-G2BNIP, Operating Instructions Manual

Page: 34 / 84

34 GB
Playing a file on a USB device
The audio format that can be played back on this
system is MP3*/WMA*/AAC*.
* On this system, files with DRM (Digital Rights
Management) copyright protection cannot be played
back, and files downloaded from an online music store
may not be played back.
Check the websites below for information about
compatible USB devices.
For customers in Europe:
http://support.sony-europe.com/
For customers in Oceania:
http://www.sony-asia.com/support
1
Press USB to select the USB
function.
2
Connect the USB device to the
(USB) port.
3
Press
N
(play) to start playback.
Other operations
* When playing a VBR MP3/WMA file, the system may
resume playback from a different point.
To Do the following:
Pause playback Press X (pause). To resume
play, press X again.
Stop playback Press x (stop). To resume
play, press
N
(play)*. To
cancel resume play, press
x again.
Select a folder Press (folder) +/–
repeatedly.
Select a file Press
.
/
>
.
Search a folder and
file Press BACK during
playback, press
M / m to
select the desired folder,
then press ENTER. Press
M / m to select the desired
file, then press ENTER.
Find a point in a file Hold down
m
/
M
during
playback, and release at the
desired point.
Select Repeat Play Press REPEAT repeatedly
until “REP” or “REP1”
lights up (page 50).
Select Shuffle Play While playback is stopped,
press PLAY MODE
repeatedly until the desired
play mode (“SHUF,” etc.)
lights up (page 50).