manualshive.com logo in svg

Sony CMT-G2BNIP, Operating Instructions Manual

Share
Download
Sony CMT-G2BNIP Operating Instructions Manual Download Page 17

17

GB

G

e

ttin
g

 st
art
e

d

1

Connect the FM lead antenna.

Find a location and an orientation that 
provide good reception, and set up the 
antenna. Make sure the antenna is fully 
extended.

Keep the antenna away from the speaker 
cords and the power cord to avoid picking up 
noise.
Use a 75-ohm coaxial cable (not supplied) to 
connect the unit to an external antenna to 
improve reception.

2

Connect the AM loop antenna.

Find a location and an orientation that 
provide good reception, and set up the 
antenna. Make sure the antenna is fully 
extended.

Keep the antenna away from the speaker 
cords and the power cord to avoid picking up 
noise.

3

Connect the DAB lead antenna 
(CMT-G2BNiP only).

Make sure the antenna is fully extended.

Use a 75-ohm coaxial cable with a male F 
type connector (not supplied) to connect a 
DAB external antenna (not supplied) to 
obtain higher DAB/DAB+ broadcast sound 
quality.

4

Connect the speaker cords.

Note

First, remove the cover attached to the end of the 
speaker cord.

Connect the speaker connectors to the 
SPEAKERS jacks on the unit.

FM lead antenna

or

DAB lead antenna 

or

Black

Summary of Contents for CMT-G2BNIP





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands