![background image](http://html.mh-extra.com/html/sony/cmt-dh5bt/cmt-dh5bt_operating-instructions-manual_420311094.webp)
CMT-DH5BT.GB.3-097-195-21(1)
GB
The sound of your Bluetooth device
cannot be heard on this system.
Turn up the volume on your Bluetooth
device first, and then adjust the volume
using /
.
Severe hum or noise
If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
Turn down the volume of the
connected Bluetooth device.
The sound from the Bluetooth
headphones is distorted.
Turn down the volume of the system
using VOLUME
. If your
headphones have a volume control,
also adjust the volume using the
headphone’s volume control.
Press DSGX
on the unit repeatedly
until “DSGX OFF” appears.
Press EQ
repeatedly to select
“BASS” or “TREBLE,” and then press
PRESET
repeatedly to turn down
the level.
USB device
Are you using a supported USB
device?
If you connect an unsupported USB
device, the following problems may
occur. See “Playable USB devices and
Bluetooth devices” (page 115) for the
supported device types.
The USB device is not recognized.
File or folder names are not
displayed on this system.
Playback is not possible.
The sound skips.
There is noise.
“Over Current” appears.
A problem has been detected with the
level of electrical current from the
(USB) port
. Turn off the system and
remove the USB device from the
(USB) port
. Make sure there is no
problem with the USB device. If this
display pattern persists, contact your
nearest Sony dealer.
There is no sound.
The USB device is not connected
correctly. Turn off the system, then
reconnect the USB device and check if
“USB MEMORY” appears.
The sound is distorted.
The bit rate used when encoding the
files was low. Send files encoded with
higher bit rates to the USB device.