Sony CM-ZS300 Operating Instructions Manual Download Page 12

Page: 12 / 65

▼

Getting Started

Charging the Battery

You can charge the battery using the AC adapter that is supplied with some
phones. You can also use one of the accessories listed on page XX to charge
your battery.

Connect the AC adapter to the phone and the other end to a standard AC
outlet as illustrated below.

When the power
is turned on

As the battery charges, the battery icon (

) pulses and

the LED remains green to indicate that the phone is
charging.

When the power
is turned off

The message

Battery is Charging

is displayed,

pulses, and the LED remains green.

When the battery is
fully charged

The LED turns from green to red and

stops

pulsing.

NOTE

• If you make or receive a call when the battery is not charged sufficiently, the call will be

cut off. In that case, you will hear an alert, indicating that the battery is low.

• You can turn on the phone without the battery, but you cannot make or receive a call,

even if you connect the AC adapter to an AC outlet.

• It is normal for the battery to become warm during charging or after use.

CAUTION

• Avoid charging for long periods of time, since this reduces battery life.

• Avoid charging in temperatures below 32

F (0?C) or over 104

F (40

C).

• Avoid charging the battery in direct sunlight or in places with high humidity (such as a

bathroom).

• Do not use any battery other than the one specified in these instructions.

• Do not expose the battery to temperatures above 140

F (60

C). For example, do not

leave the battery in the sun on the dashboard of a vehicle.

• Do not dispose of the battery in a fire or short-circuit it. Doing so may cause the battery

to leak or get hot, which could cause personal injury.

• Do not try to disassemble the battery.

• Do not remove the battery while the phone is turned on.

To the connector on the phone

To an AC outlet

Display

capri.book Page 14 Tuesday, February 9, 1999 5:20 PM

Summary of Contents for CM-ZS300


































































Search results

Summary of Contents for CM-ZS300

Reviews:

Related manuals for CM-ZS300

Brands by name

Popular brands

Sony CM-ZS300, Operating Instructions Manual

Search results

Summary of Contents for CM-ZS300

Reviews:

Related manuals for CM-ZS300

Brands by name

Popular brands