6-15
Power on Reset Actions
Step
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
Item
Drive Power-On
Spin-up (tentative spindle servo gain setting)
LD On
Spindle Kick
Focus Search
Focus On
EF Balance Auto Adjustment
Tracking and Sled Servo On
Spindle Servo On
— sync pattern detection —
Focus Servo Gain Auto Adjustment
Track Servo Gain Auto Adjustment
Focus Bias Voltage Auto Adjustment
Disc Diameter (8cm/12cm) Detection
— sync pattern detection —
Change rotational speed from X1 to X4
(ex. Yellow Disc)
Read TOC
Jump to 00:02:00
— Subcode-Q detection —
Disc Linear Speed Detection
Jump to 00:02:00
Set MAX. rotational speed
— sync pattern detect & subcode-Q detection—
— Completed —
Drive Action
LED to indicate Amber
Spin-Up
LD to turn on
OP lens to move up and down
(You will hear a small beep sound from the drive during these auto adjustment.)
(You will hear a small beep sound from the drive during these auto adjustment.)
(You will see RF Signal with Spindle-Kicking waveform.)
(Refer to 6-3-4-13)
Note: When a disc is replaced, the above steps excluding item (1) to (3) will be executed.
The item (1) to (3) will be performed only after power-on.
Summary of Contents for CDL1100
