6-9
Sony SCSI CD-ROM Failure Verification Test Ver. 1.00.02
[MAR. -04-1997]
[ID:7]=ASW-1210 V 3.60 ADAPTEC AHA-1520ADAPTEC AHA-1520
ATP415.CFG X-XXX-XX-XX
00:
Inquiry Check
01:
TEST UNIT READY
02:
TOC Read
03:
Incremental Read
04:
Spin Up/Down
(X1)
05:
Spin Up/Down
(X4)
06:
Spin Up/Down
(MAX)
07:
Full seek Read
(X1)
08:
1/3 seek Read
(X1)
09:
Full seek Read
(X4)
10:
1/3 seek Read
(X4)
11:
Full seek Read
(MAX)
12:
1/3 seek Read
(MAX)
13:
Play Audio (De-TRCK)
14:
Play Audio (E-Volume)
15:
Play Audio (Play Mode)
16:
Play Audio (X’Talk L->R)
17:
Play Audio (X’Talk R->L)
18:
Sub Code Read
19:
Eject Test
20:
Play Audio 8cm Disc
g. Change the directory in the drive A. (“A >” is displayed on the
screen.)
h. Type A T P 4 1 5 and hit Enter key. (After loading the test
program, Display 6-3-3-1. (a) shows up.)
i. While pressing the TEST button of the CDL1100 (CDM-47)
controller, turn on the DC power supply or CDL1100 power, and
release the TEST button about 1 second later.
6-3-3. PROCEDURE OF ATP TEST
6-3-3-1. Pre-setting
a. Connect the test drive to the PS/VP System. (Refer to Fig. 2-3-1.)
b. Set the Jumpers on the Adaptec SCSI board. (Refer to Fig. 2-3-1.)
c. Connect the test drive to the CDL1100 (CDM-47) CONTROL-
LER and set the COMMAND SW as below.
Hit any key to start or Esc to exit.
?
Drive Status Column
Display 6-3-3-1. (a)
ID2
H
ID1
L
ID0
L
PARITY
L
d. Connect the test drive to the DC power supply.
e. Turn on the power of PS/VP System.
f. After loading the system, “C >” is displayed on the screen. Then,
insert ATP415 Disc.
Summary of Contents for CDL1100
