![background image](http://html.mh-extra.com/html/sony/cas-1/cas-1_service-manual_420233025.webp)
CAS-1
25
LED CHECK
It can check the lighting-up of each LEDs.
(Refer to “LED position” on page 24 about position of LED)
Procedure:
1. Enter the servicing mode.
(Refer to “1. Setting method of servicing mode” on page 24)
2. Press the buttons on the remote commander that correspond to
each LED check modes in order, and transmit the test code to
the main unit (Refer to the following table).
Note 1:
Press the each button in 150 ms or more interval, and perform the
all button operations in 7 seconds or less.
Mode
Buttons of remote commander
All LED lighting-up check
[AMP]
→
[DISPLAY]
→
[0/10]
→
[2]
→
[0/10]
→
[1]
→
[ ]
All LED lighting-off check
[AMP]
→
[DISPLAY]
→
[0/10]
→
[2]
→
[0/10]
→
[2]
→
[ ]
Input [B], BLUETOOTH
standby mode, status
indicator LED (1, 3, 5, 7)
lighting-up check
[AMP]
→
[DISPLAY]
→
[0/10]
→
[2]
→
[0/10]
→
[3]
→
[ ]
Input ([ ], [A]), status
indicator LED (2, 4, 6)
lighting-up check
[AMP]
→
[DISPLAY]
→
[0/10]
→
[2]
→
[0/10]
→
[4]
→
[ ]
Lighting-up LED dimmer
off check
[AMP]
→
[DISPLAY]
→
[0/10]
→
[2]
→
[1]
→
[0/10]
→
[ ]
Lighting-up LED dimmer
on check
[AMP]
→
[DISPLAY]
→
[0/10]
→
[2]
→
[1]
→
[1]
→
[ ]
3. When releasing from the LED check mode, press the [AMP]
→
[DISPLAY]
→
[0/10]
→
[2]
→
[0/10]
→
[0/10]
→
[ ]
buttons on the remote commander in order, and transmit the
test code to the main unit.
Note 2:
Press the each button in 150 ms or more interval, and perform the
all button operations in 7 seconds or less.
KEY CHECK
It can check the operation of each buttons and switches.
(Refer to “LED position” on page 24 about position of LED)
Procedure:
1. Enter the servicing mode.
(Refer to “1. Setting method of servicing mode” on page 24)
2. Press
the
[AMP]
→
[DISPLAY]
→
[0/10]
→
[3]
→
[0/10]
→
[1]
→
[ ] buttons on the remote commander in order, and trans-
mit the test code to the main unit.
Note 1:
Press the each button in 150 ms or more interval, and perform the
all button operations in 7 seconds or less.
3. When entering the key check mode, status indicator LEDs (1,
2, 3, 4, 5) light up.
4. Each time a following button is pressed and a following switch
is changed, status indicator LED light off from “5” in order,
and when all buttons is operated, all status indicator LEDs
light off.
•
[
?
/
1
] button
• Input select button
•
[ PAIRING] button
•
[
i
GAIN] switch
• [AUTO STANDBY] switch
5. When releasing from the key check mode, press the [AMP]
→
[DISPLAY]
→
[0/10]
→
[3]
→
[0/10]
→
[0/10]
→
[ ] but-
tons on the remote commander in order.
Note 2:
Press the each button in 150 ms or more interval, and perform the
all button operations in 7 seconds or less.
FAN TEST
It can check the operation of fan motor.
Procedure:
1. Enter the servicing mode.
(Refer to “1. Setting method of servicing mode” on page 24)
2. Press the buttons on the remote commander that correspond to
each fan test modes in order, and transmit the test code to the
main unit (Refer to the following table).
Note 1:
Press the each button in 150 ms or more interval, and perform the
all button operations in 7 seconds or less.
Mode
Buttons of remote commander
Fan off test
[AMP]
→
[DISPLAY]
→
[0/10]
→
[4]
→
[0/10]
→
[2]
→
[ ]
Fan on test
[AMP]
→
[DISPLAY]
→
[0/10]
→
[4]
→
[1]
→
[2]
→
[ ]
3. When releasing from the fan test mode, press the [AMP]
→
[DISPLAY]
→
[0/10]
→
[4]
→
[0/10]
→
[0/10]
→
[ ] but-
tons on the remote commander in order, and transmit the test
code to the main unit.
Note 2:
Press the each button in 150 ms or more interval, and perform the
all button operations in 7 seconds or less.
Summary of Contents for CAS-1
Page 34: ...CAS 1 34 MEMO ...
Page 97: ...MEMO CAS 1 17 ...