[133] Troubleshooting
Remote control/accessories
The remote control does not operate.
You cannot turn the Active 3D Glasses on. (3D models only)
The LED indicator on the Active 3D Glasses blinks. (3D models only)
[134] Troubleshooting | Remote control/accessories
The remote control does not operate.
Press a button on the TV to determine if the problem is with the remote control or not.
Check that the orientation of each battery matches the positive (+) and negative (-) symbols in the
battery compartment.
Battery power may be low. Remove the remote control cover and replace the batteries with new
ones.
Sliding type
Push-release type
There may be poor contact between the battery and the remote control. Remove the batteries, then
insert them again.
Point the remote control at the remote control sensor located at the front of the TV.
Keep the remote control sensor area clear from obstacles.
Fluorescent light can interfere with remote control operation; try turning off any fluorescent light.
When you unplug the TV and plug it in again, the TV may not be able to turn on for a while even if
you press the power button on the remote control or the TV because it takes time to initialize the
system. Wait for about 10 to 20 seconds, then try again.
92
