Sony Bravia KLV-40ZX1, Operating Instructions Manual, Page: 5 / 183

5
GB
Start-up G
u
ide
2
Place the Table-Top Stand on a level and
stable surface, then remove the stand
cover.
3
Gently slide the monitor onto the neck of
the Table-Top Stand by aligning the
F
mark of the plate to the top part of the
Table-Top Stand. Be sure to work with
two or more people.
4
Attach the monitor to the Table-Top Stand
using the supplied screws. Attach the two
bottom screws first, then the top two
screws.
~
• If an electric screwdriver is used, set the
torque to tighten at approximately 1.5 N·m
{15 kgf·cm}.
• Do not put stress on the LCD panel or the
frame around the screen.
• Hold the Table-Top Stand firmly with both
hands.
5
Connect the AC power cord (supplied) to
the AC IN jack.
~
• Insert the plug fully into the jack.
• When using with an HDMI equipment, also
connect the HDMI cable to the HDMI IN
jack (page 26).
Stand cover
F mark
Top part
Top screws
Bottom screws
to AC power
outlet
(Continued)