Sony Bravia KLV-40ZX1, Operating Instructions Manual, Page: 11 / 183

11
GB
Start-up G
u
ide
1
Press F / f to select the language displayed
on the menu screens, then press .
~
• If the remote does not work, press
F
/
f
/ on
the monitor or media receiver (page 21) to
select the language. The remote registration
screen appears.
2
Select “OK” then press .
3
Press
F
/
f
to select the country in which
you will operate the unit, then press .
4
Press
F
/
f
to select the location type in
which you will operate the unit, then press
.
~
• Select “Home” for the best monitor settings
to use the monitor in the home.
5
Select “OK” then press .
Make sure that the antenna is connected.
The unit starts searching for all available
channels. This may take some time, so do
not press any buttons on the unit or remote
while proceeding.
6
If you want to change the order of
channels, follow the steps of “Programme
Sorting” (page 35).
After setting “Programme Sorting”, the
“Clock Set” menu appears on the screen
(page 32).
7
For details, see page 32.
8
Press to G / g to select “Yes” to enable
control for compatible HDMI equipment
when using the control for HDMI function
(page 30).
9
Press
G
/
g
to select “Yes” to display this
menu again next time, otherwise select
“No”.
The unit has now tuned in all the available
channels.
L a ng ua ge
Engli s h
ᶑ㓫
OK
Next, the Media Receiver Initial Set-up will start.
Please make sure the Media Receiver is on.
China / Asia (except following) / Africa / Oceania
Philippines
Country
Select country
Location
Home
Select location
Shop
Auto Tuning
OK Cancel
Do you want to start Auto Tuning?
Quick Start
Yes No
Do you want to enable Quick Start?
TV turns on more quickly but standby power
consumption is increased.
Control for HDMI
Yes No
Do you want to enable control for compatible
HDMI devices?
Choosing "Yes" will increase
standby power consumption.