Sony Bravia KDL-32CX520 Service Manual Download

Page: 71 / 98

(

)

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520

4-268-265-12(1)

2: Adjusting the viewing

angle of the TV

This TV can be adjusted within the angles as
illustrated.

Angle adjustment (Swivel)
(except KDL-26/22EX42x)

•

When adjusting the angle, hold the stand with one
hand to avoid having the stand slip or TV tip over.

Except KDL-32EX420 (Australia model)

KDL-32EX420 (Australia model)

Angle adjustment (Tilt)
(except KDL-46/40/32CX523/
KDL-46/40/32CX520)

•

Be careful not to pinch your fingers between the TV
and stand when adjusting the angle.

KDL-55/46/40/32EX723,
KDL-55/46/40/32EX720,
KDL-46/40/32EX523, KDL-46/40/32EX520
and KDL-32EX420 (except Australia model)

KDL-26/22EX423 and KDL-26/22EX420

KDL-32EX420 (Australia model)

•

Ensure that there are no objects in front of the TV.

•

Do not expose the Presence Sensor to direct sunlight
or other strong light, as malfunction may occur.

20°

15°

0° - 6°

6°

0°

Presence Sensor

3D Sync Transmitter
(KDL-55/46/40/32EX72x
only)

IR Sensor

GB01COV.book Page 8 Wednesday, December 15, 2010 1:22 PM

www.eletronicageral.com.br

Summary of Contents for Bravia KDL-32CX520



































































































Search results

Summary of Contents for Bravia KDL-32CX520

Reviews:

Related manuals for Bravia KDL-32CX520

Brands by name

Popular brands

Sony Bravia KDL-32CX520, Service Manual

Search results

Summary of Contents for Bravia KDL-32CX520

Reviews:

Related manuals for Bravia KDL-32CX520

Brands by name

Popular brands