Sony BKSI-2040 Series, Installation Manual

Page: 22 / 30

1-14 (E)
BKSI-2440
1-6-5. Connection of the RS-232C/422A
Connectors
The respective RS-232C/422A connectors (D-sub 9-pin)
on the connector panel can be set to either RS-422A (M)
interface, RS-422A (S) interface or RS-232C interface
depending on the connections of the connectors as de-
scribed below.
The connections can be set individually on each connector.
CN41
CN42 CN52
CN44 CN54
CN43 CN61
CN62
CN64
CN63 CN71
CN72
CN74
CN73 CN81
CN82
CN84
CN83 CN91
CN92
CN94
CN93 CN51 CN53
CN41, CN51, CN61, CN71, CN81, CN91
: For RS-232C/RS-422A connection
These connectors are connected to the respective RS-232C/
422A connectors on the connector panel.
n
Do not change the positions of these connectors.
CN42, CN52, CN62, CN72, CN82, CN92
: For RS-232C setting
Connect these connectors when the respective RS-232C/
422A connectors on the connector panel are used as the
RS-232C ports.
n
When the setting connector is connected to this mode, the
red connector of the setting connector can be confirmed
through the slot.
232C
1
Red connector
n
When making cable connections from other equipment to
the connectors on the connector panel, confirm that the
RS-232C signal names of this connector (Refer to “1-6-3.
Signal Inputs/Outputs”) and the signal names of the
connector of other equipment.
CN43, CN53, CN63, CN73, CN83, CN93
: For RS-422A (M) setting
Connect these connectors when the respective RS-232C/
422A connectors on the connector panel are used as the
RS-422A controlling devices. (Factory setting)
CN44, CN54, CN64, CN74, CN84, CN94
: For RS-422A (S) setting
Connect these connectors when the respective RS-232C/
422A connectors on the connector panel are used as the
RS-422A controlled devices.
Setting Procedure
1. Unhold the wire holder.
2. Disconnect the (red) setting connector coming from
the (black) RS-232C/422A connection connector.
Re-connect the (red) setting connector to the desired
connector in accordance with the signal format.
c
Pay attention to the edge of connector panel when discon-
necting the connectors.
It can give wound on your fingers.
Hold the harness securely and disconnect the connectors
slowly.
3. Clamp the harnesses with the wire holder.
List of Settings
Setting Connectors Communication Types
RS-232C RS-422A (M) RS-422A (S)
CN41 CN42 CN43 CN44
CN51 CN52 CN53 CN54
CN61 CN62 CN63 CN64
CN71 CN72 CN73 CN74
CN81 CN82 CN83 CN84
CN91 CN92 CN93 CN94
Black connector
Red connector
Wire holder