1-8 (E)
BKSI-2440
1-4. Information of BKSI-2440
1-4-1. Setting and Function of Switches/
LEDs on Board
n
Never change the setting of the switches shown by
Facto-
ry use only
.
CPU-356 board
(A side/component side)
n
( ) marks show the address on board.
.....
Switches
S100 (A-5): System setting
(dip switch)
This switch is used for setting of the system operation.
The following figure shows the factory settings.
S100-1:
ON
Boot monitor
OFF
Usual (factory setting)
S100-2:
ON
Factory use only
OFF
Usual (factory setting)
S100-3 to 4: Unassigned (factory settings: OFF)
CN1300
D714
CN400
D401
S400
S700
S501
CN1201
CN1200
S100
S500
S1200
D100
D600
ND700
ND701
ND100
ND101
S1201
CN700
CN100
CN1301
CN1204
CN1203
CN1202
CN500
1
ON
2
3
4
S700 (A-4): System setting
(dip switch)
This switch is used for setting of the system operation.
The following figure shows the factory settings.
S700-1:
ON
Boot monitor
OFF
Usual (factory setting)
S700-2:
ON
Factory use only
OFF
Usual (factory setting)
S700-3 to 4: Unassigned (factory settings: OFF)
S500 (A-5), S501 (A-4), S1202 (A-4): CPU reset
(push
switch)
CPUs on the CPU-356 board are reset, when these switch
are pressed.
S500:
Reset switch for IC100
S501:
Reset switch for IC700
S1201: Reset switch for IC100 and IC700
S400 (A-3): Compact flash card release
(push switch)
This switch is used for releasing the compact flash card.
S1200 (A-6): System setting
(dip switch)
This switch is used for setting when this board uses for
root controller.
The following figure shows the factory settings.
S1200-1 to 8: Unassigned (factory settings: OFF)
1
ON
2
3
4
5
6
7
8
1
ON
2
3
4
