1-5 (E)
BKP-7090
(9)
Install the power assembly that was removed in step (2).
(10) Place the label (2) on the partition as shown in the figure.
(11) Install the AU-177, MD-83 and MS-37 boards that were removed in step (2) and the five plug-in
boards supplied with the BKP-7090 in order of board name markings on the label (2).
m
.
The leftmost slot that is empty is for an optional board.
.
If the camera is used together with the OHB-750WSA/750WSAP/730WS/730WSP, replace the
CN-1566 board, which has been connected to the DA-128 board, with the RC-68 board.
The RC-68 board is supplied with the OHB-750WSA/750WSAP/730WS/730WSP and switches
aspect ratio.
(12) Connect the flexible card wire that was disconnected in step (3), to CN22 on the MB-764 board.
Reinstall the rear panel.
1-2. Installing the BKP-7090 in the BVP-700/700P
Plug-in board
Label(2)
DA-128
2 mm
Label(2)
Partition
EN
Lever
AD
PR
DA
MS
MD
AU
AT
PS
