3-10 (E)
BKP-5090
3-1. Setup Menu (BVP-550 series)
3-1-2. Paint Menu
Page
Ver.
Item
Settings
Contents
Matrix
G-R, B-R
_
99 to 99 (
[0]
)
Compensates the user’s matrix (sets an optional value as the constant
R-G, B-G
_
99 to 99 (
[0]
)
for G-R, B-R, R-G, B-G, R-B, and G-B).
R-B, G-B
_
99 to 99 (
[0]
)
Matrix
[On]
, Off
Turns the matrix compensation on and off.
User
e)
[On]
, Off
Turns the user’s matrix compensation on and off
Preset
e)
[On]
, Off
Turns on and off only the preset matrix compensation
(fixed constant compensation)
Mult. MTX
e)
On,
[Off]
Turns on and off the multi matrix by which an optional value as the
constant can be set for each area of 16-part divided color tones
Area No.
f)
[1]
to 16
Selects the one of 16-part divided color tones
Hue
_
99 to 99 (
[XX]
)
Adjusts the hue for the area selected by the above Area No. item
Sat
_
99 to 99 (
[XX]
)
Adjusts the saturation for the area selected by the above Area No. item
Test
1, 2,
[Off]
Selects the test signal.
1
: Outputs the sawtooth waveform test signal
2
: Outputs 3-step form test signal
Off
: No test signal is output
Clear
Press MENU SEL
Sets all settings on the Matrix page to 0.
switch to execute.
(When you press MENU SEL switch, the “Clear” indication flashes.
Press MENU SEL switch again to execute; press CANCEL button to
cancel.)
Scene File
1
Storing and recalling a scene file (painting data corresponding to a shot scene)
2
Storing a scene file
3
1 Turn MENU SEL switch to move the
→
cursor to “File Store,” then press MENU SEL
4
switch. “File Store” flashes on the viewfinder screen.
5
2 Select the file number (1 to 5) to be stored to.
File Store
(If data is already stored at the selected location, the new data replaces the current data.)
Recalling a scene file
Turn MENU SEL switch to move the
→
cursor to the file number whose data is to be recalled,
then press MENU SEL switch.
.
When MENU SEL switch is pressed, the scene file data replaces the current settings.
.
When the scene file is recalled, an asterisk appears next to the number.
Standard
Returns the current amount of paint adjustments and switch setting to their reference value
stored as a reference file.
Shutter
Shutter
On,
[Off]
Turns the shutter on and off.
u)
Shutter
100
(or
60
),
125
,
250
,
Selects the shutter speed.
500
,
1000
,
2000
ECS
On,
[Off]
Turns the ECS mode on and off.
u)
ECS
h)
Sets the ECS (CLS) frequency.
S-EVS
On,
[Off]
Turns the S-EVS mode on and off.
u)
S-EVS
[0]
to 100%
Sets the desired resolution in %.
(This setting is invalid with the OHB-450/450P/451/451P installed.)
Others
16:9/4:3 Mode
[16:9]
, 4:3
Selects the aspect ratio for the video signal output.
i)
e)
When the User, Preset and Multi.MTX are all set to ON, the value of their sum as the matrix constant is sent to the matrix circuit.
f)
When the both User and Preset are set to ON, the value of their sum is given for all the areas of 16-part divided color tunes as equal
coefficient.
h)
Variable range differs depending on the OHB in use. For details refer to the operation manual supplied with the OHB.
i)
The aspect ratio normally corresponds to the CCU’s setting when the CCU is connected. To forcibly select, use this menu.
u)
If the shutter mode selection is made both by the SHUTTER switch in the camera front and from the setup menu, last-set item is
selected.
If the Shutter and ECS are both set to ON in the menu, the ECS mode is automatically selected. And if the ECS and S-EVS are both
set to ON, the S-EVS mode is.
1
1
1
1
1
1
1
