19
2
Remove the pawls that lock the
connector panel. Remove the
connector panel from the main
bracket.
3
Remove the 6 screws from the
connector panel. Remove the
connector panel cover.
Connector panel
Connector panel cover
BVTP 3
×
8 (6)
4
From the back of the connector
panel cover, create two holes.
These holes are for installing the
BNC connectors. (Use pinch
pliers as needed.)
5
From the back of the connector
board, insert the two BNC
connectors (supplied) through the
two holes. From the front of the
connector board, insert the
washers. Lock the connectors
with the nuts.
6
Use the screws to install the
connector panel cover on the
connector board.
7
Insert the connector panel in the
main bracket. Reconnect the
cables that were disconnected in
Step
1
.
BNC connectors
(supplied)
Washers
(supplied)
Nuts (supplied)
(Continued)
