16
Installing the Input Adaptor
Installing the Power
Block
1
Remove the screw (PS3
×
8) to
remove the power block shield
case.
2
Hook the power block (the shield
case has been removed) on the G
board shield case (see figure).
Lock the power block with the
screw (3
×
8) (supplied).
1
2
3
Install the power block shield case
removed in Step 1. Lock the case
with the screw.
4
Lock the power block cables
(black/white and black/red) with
the two purselocks (see figure).
Connect the cable (black/white) to
the CN610 connector on the G
board.
Screw PS3
×
8
Screw 3
×
8 (supplied)
Shield case
G board
Power block
CN610
Purselocks
