1-3 (E)
BDX-M1000
1-4. Rack Mounting
Rear bracket
Front bracket
Outer rail
Required parts
.
Rack Mount Rail, RMM-30
Rail with bracket
: 2 pcs.
Screw (B5
x
8)
: 8 pcs.
.
Screw for inner rail (B4
x
8)
(
*
1)
: 6 pcs.
.
Screw for rack mounting (RK5
x
16)
: 4 pcs.
(Sony part number: 7-682-378-04)
.
Washer for rack mounting
: 4 pcs.
(Sony part number: 2-297-913-01)
(
*
1)
: The BDX-M1000 comes with the eight screws. The
two screws of them are spare.
n
Be sure to use the RMM-30 Rack Mount Rail.
If a rack mount rail other than the RMM-30 is used, the
BDX-M1000 may be dropped by insufficient strength of
the rack mount rail. This may cause a injury.
Procedures
1.
Turn the power off.
2.
Remove the four feet from the bottom of the BDX-
M1000.
3.
While pressing the stopper of the rail, pull out the
inner rail.
4.
Attach the inner rails to the BDX-M1000 using the six
screws (B4
x
8) supplied with the BDX-M1000.
5.
Loosen the screws fastening the rear bracket to the
outer rail, and adjust the position of the rear bracket
with the rack depth.
Feet
BVTT 3
x
12
Feet
BVTT 3
x
12
Stopper
Inner rail
Outer rail
Inner rail
Inner rail
B 4
x
8
B 4
x
8
