1-4 (E)
BDX-M1000
1-4. Rack Mounting
6.
Attach the front and rear brackets to the outside of the
rack temporarily using the eight screws (B5
x
8)
supplied with RMM-30.
7.
While pressing the stoppers of the inner rails, slide the
inner rails fully into the outer rails.
c
.
Be sure to mount the BDX-M1000 in the rack with two
or more persons.
Trying to handle this job by one-person could occur to
injury.
.
Be careful not to get caught your hand and finger in the
rack mount rail when installing the unit in the rack.
8.
After confirming that the BDX-M1000 can be moved
smoothly, tighten the screws (B5
x
8) secured
temporarily in the step 6.
n
When securing the front brackets to the rack by
screws, pull out the BDX-M1000 about 20 cm
(8 inches), and fasten the screws of the front brackets
to the rack.
9.
After installing the BDX-M1000 in the rack, secure
the unit to the rack by the prepared four screws
(RK5
x
16) and four washers.
n
When the BDX-M1000 is mounted in a rack, the maxi-
mum traveling distance is illustrated below.
RK 5
x
16
Washers
Washers
RK 5
x
16
Rack
132
66
581 (Maximum traveling distance)
Distance to the center of the slide rail
Height of the unit mounted in a rack
Unit : mm
Rack
Stopper
Inner rail
Outer rail
Rack
Rack
Outer rails
Front bracket
Rear bracket
B 5
x
8
B 5
x
8
Unit : mm
12.7
31.75
12.7
31.75
31.75
