1-3
11
Getting S
tarted
D
Connecting to an HDMI input jack
Use a certified Sony HDMI cord (not supplied) to enjoy high
quality digital pictures and sound through the HDMI OUT jack.
You will enjoy higher quality pictures from 480p/1080i, or
1080p (highest among the player output), if your TV, projector
or AV amplifier (receiver) is compatible.
This Blu-ray Disc player incorporates High-Definition
Multimedia Interface (HDMI™) technology. HDMI, the HDMI
logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
Notes on connecting to the HDMI OUT jack
Observe the following as improper handling may damage the
HDMI OUT jack and the connector.
• Carefully align the HDMI OUT jack on the back of the player
and the HDMI connector by checking their shapes. Make sure
the connector is not upside down or tilted.
• Be sure to disconnect the HDMI cord when moving the player.
• If you place the player on the cabinet with the HDMI cord
connected, do not apply too much pressure to the cabinet wall.
It may damage the HDMI OUT jack or the HDMI cord.
• When connecting or disconnecting, do not screw in or rotate
the HDMI connector.
About indicators for HDMI connection
After the player is turned on, the HD indicator on the front panel
lights up when outputting 720p/1080i/1080p video signals. The
HDMI indicator lights up when an HDMI device is connected.
Notes
• Consumers should note that not all high definition television sets are
fully compatible with this product and may cause artifacts to be
displayed in the picture. In the case of 480p/720p/1080i/1080p scan
picture problems, it is recommended that the user switch the
connection to the ‘standard definition’ output. If there are questions
regarding our TV set compatibility with this model 480p/720p/1080i/
1080p Blu-ray Disc player, please contact our customer service center.
• If the picture is not clear, not natural or not to your satisfaction, change
the video output resolution by pressing VIDEO FORMAT
(page 46)
.
• Be sure to use only an HDMI cord that bears the HDMI logo.
About the ‘BRAVIA’ Theatre Sync
features (for HDMI connections only)
By connecting Sony components that are compatible with the
HDMI Control function with an HDMI cord (not supplied),
operation is simplified as below:
• One-Touch Play
(page 21)
You can turn on the player and TV/AV receiver, set the TV/AV
receiver’s input to the player, and start playback with one touch
of the
H
button.
• System Power-Off
When you turn the TV off by using the POWER button on the
TV’s remote, the HDMI compatible components turn off
automatically.
To prepare for the ‘BRAVIA’ Theatre Sync
features
Set “HDMI Control” of “Options” setup to “On”
(page 52)
.
Note
Depending on the connected component, the HDMI Control function
may not work. Refer to the operating instructions supplied with the
component.
VIDEO
OUT
VIDEO
S VIDEO
HDMI
OUT
COMPONENT
VIDEO OUT
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
AUDIO
OUT
L
R
5.1CH OUTPUT
L
R
WOOFER
FRONT
REAR
CENTER
AC IN
Y
PB
PR
HDMI IN
HDMI
OUT
HDMI cord (not supplied)
Blu-ray Disc player
to HDMI OUT
TV, projector, or AV
amplifier (receiver)
HD
M
I
OU
T
HD
M
I
OU
T
12
Step 3: Connecting the
Audio Cords
Select the connection that best suits your system. Be sure to read
the instructions for the components you wish to connect.
*1 Manufactured under license from Dolby laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby
Laboratories.
*2 Manufactured under license under U.S. Patent #: 5,451,942 & other
U.S. and worldwide patents issued & pending. DTS is a registered
trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Digital
Out are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights
Reserved.
Notes about the HDMI OUT jack
• When you connect the player to an AV amplifier (receiver)
using an HDMI cord, you will need to do one of the following:
– Connect the AV amplifier (receiver) to a TV with the HDMI
cord.
– Connect the player to the TV with a video cord other than an
HDMI cord (component video cord, S VIDEO cord, or video
cord).
• When connecting to the HDMI OUT jack, carefully align the
HDMI connector with the jack. Do not bend or apply pressure
to the HDMI cord.
• If you change the component connected to the HDMI OUT
jack, change “Audio (HDMI)” in “Audio Setup” to match the
new component
(page 47)
. The player stores the HDMI related
settings for up to five components.
• The HDMI connection is compatible with 2ch Linear PCM
signals (48 to 192 kHz, 16/20/24 bit), and 6 to 8ch Linear PCM
signals (48 to 96 kHz, 16/20/24 bit), in addition to Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS (include
DTS-ES, DTS96/24) and DTS-HD High Resolution Audio
bitstream.
Note
If you connect a component that does not conform to the selected audio
signal, a loud noise (or no sound) will come out from the speakers, which
could damage your ears or speakers.
Connection
Your setup
TV
Stereo amplifier (receiver) and
two speakers
AV amplifier (receiver) having a
Dolby
*1
Surround (Pro Logic)
decoder and 3 to 6 speakers
• Surround effects: Dolby Surround
(Pro Logic)
AV amplifier (receiver) with
5.1ch input jacks and 6 speakers
• Surround effects: Dolby Digital
(5.1ch), DTS (5.1ch)
AV amplifier (receiver) with a
digital input jack having a Dolby
Digital or DTS
*2
decoder and 6
speakers
• Surround effects: Dolby Digital
(5.1ch), DTS (5.1ch)
AV amplifier (receiver) with an
HDMI input jack having a Dolby
Digital Plus, Dolby TrueHD, or
DTS-HD High Resolution Audio
decoder, and 8 speakers
• Surround effects: Linear PCM
(7.1ch), Dolby Digital Plus,
Dolby TrueHD, DTS-HD High
Resolution Audio bitstream
A
B
C
D-1
D-2
D-3
13
Getting S
tarted
Connecting to your TV
This connection will use your TV’s speakers for sound.
Connecting to a stereo amplifier
(receiver) and 2 speakers
If your stereo amplifier (receiver) only has audio input jacks L
and R, use
. If your amplifier (receiver) has a digital input
jack, use
.
VIDEO
OUT
VIDEO
S VIDEO
HDMI
OUT
COMPONENT
VIDEO OUT
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
AUDIO
OUT
L
R
5.1CH OUTPUT
L
R
WOOFER
FRONT
REAR
CENTER
AC IN
Y
PB
PR
AUDIO
OUT
to AUDIO OUT L/R
(white)
Blu-ray Disc player
A
VIDEO
OUT
VIDEO
S VIDEO
HDMI
OUT
COMPONENT
VIDEO OUT
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
AUDIO
OUT
L
R
5.1CH OUTPUT
L
R
WOOFER
FRONT
REAR
CENTER
AC IN
Y
PB
PR
B-2
B-1
AUDIO
OUT
L
R
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
Optical digital
cord (not supplied)
to DIGITAL OUT
(COAXIAL or
OPTICAL)
or
(red)
(white)
Stereo audio
cord (supplied)
to audio input
Stereo amplifier (receiver)
[Speakers]
Front (L)
Front (R)
to coaxial or optical
digital input
Coaxial digital
cord (not supplied)
: Signal flow
Blu-ray Disc player
to AUDIO OUT
L/R
(white)
(red)
B
B-1
B-2
,
continued
14
Connecting to an AV amplifier
(receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
If your AV amplifier (receiver) only has L and R audio input
jacks, use
. If your amplifier (receiver) has a digital input
jack, use
.
You can enjoy surround effects only when playing Dolby
Surround audio or multi-channel audio (Dolby Digital or DTS)
discs.
Connecting to an AV amplifier
(receiver) with 5.1ch input jacks and 6
speakers
If your AV amplifier (receiver) has 5.1 channel inputs, use
.
VIDEO
OUT
VIDEO
S VIDEO
HDMI
OUT
COMPONENT
VIDEO OUT
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
AUDIO
OUT
L
R
5.1CH OUTPUT
L
R
WOOFER
FRONT
REAR
CENTER
AC IN
Y
PB
PR
C-2
C-1
AUDIO
OUT
L
R
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
Coaxial digital
cord (not supplied)
to DIGITAL OUT
(COAXIAL or
OPTICAL)
or
to AUDIO OUT
L/R
(red)
(white)
Stereo audio
cord (supplied)
(red)
(white)
to audio input
to coaxial or optical
digital input
Optical digital
cord (not supplied)
[Speakers]
[Speakers]
Rear (L) Rear (R)
Subwoofer
Center
Rear (mono)
Front (L)
Front (R)
AV Amplifier
(receiver) with a
decoder
: Signal flow
Blu-ray Disc player
z
Hint
For correct speaker location, see the operating instructions of the
connected components.
Note
When connecting 6 speakers, you do not need the “Rear (mono)” speaker
above.
C
C-1
C-2
VIDEO
OUT
VIDEO
S VIDEO
HDMI
OUT
COMPONENT
VIDEO OUT
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
AUDIO
OUT
L
R
5.1CH OUTPUT
L
R
WOOFER
FRONT
REAR
CENTER
AC IN
Y
PB
PR
5.1CH OUTPUT
L
R
WOOFER
FRONT
REAR
CENTER
D-1
[Speakers]
[Speakers]
Rear (L)
Rear (R)
Subwoofer
Front (L)
Front (R)
Center
AV amplifier
(receiver) with
5.1ch inputs
: Signal flow
to 5.1CH
OUTPUT
Blu-ray Disc player
to audio input
Stereo audio
cord (one is
supplied)
Monaural
audio cord
(not supplied)
z
Hint
For correct speaker location, see the operating instructions of the
connected components.
D-1
D-1
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
