Charging the battery pack
Supplying power from a wall outlet (wall socket)
You can use the camera while power is supplied from a wall outlet (wall
socket) by using the AC Adaptor (supplied).
1
Insert the battery pack into the camera (page 50).
2
Connect the camera to a wall outlet (wall socket) using the
micro USB cable (supplied) and the AC Adaptor (supplied).
Notes
• The camera will not activate if there is no remaining battery. Insert a sufficiently
charged baltery pack into the camera.
• [f
you use the camera while power is being supplied from a wall outlet (wall socket).
make sure that the icon (@ml\l) displays on the monitor.
• Do not remove the battery pack while power is being supplied f
r
om a wall outlet
(wall socket). If you remove the bauery pack, the camera will turn off.
• Do not remove the battery pack while the access lamp (page 20) is lit. The data on
the memory card may be damaged.
• As long as the power is on, the battery pack will not be charged even if the camera is
connected to the AC Adaptor.
• Under certain conditions. power may be supplied from the battery supplementarily
even if you are using the AC Adaptor.
• Do not remove the micro USB cable while power is being supplied via USB
connection. Before you remove the micro USB cable. tum off the camera.
• While power is being supplied via USB connection. the temperature inside the
camera may rise. shortening the continuous recording duration.
• When using a mobile charger as a power source, conlinn Lhat it is fully charged
before use. Also. be careful of the remaining power on the mobile charger during
use.
GB
54
Charging the battery pack
5
Connect the camera to the AC Adaptor (supplied) using the
micro USB cable (supplied), and connect the AC Adaptor to the
wall outlet (wall socket).
The charge lamp lights orange, and
charging starts.
• Turn off the camera while charging
the battery.
• If the charge lamp lights up and then
immediately turns off. the battery
pack is fully charged.
• When the charge lamp flashes and
charging is not finished, remove and
re-insert the battery pack.
• For countries/regions other than the
USA and Canada, connect the power
cord to the AC Adaptor, and connect
the AC Adaptor to the wall outlet
(wall socket).
Charge lamp
Lit: Charging
Off: Charging finished
Flashing:
Charging error or charging paused
temporarily because the camera is
not within the proper temperature
range
GB
51