Functions that can be selected using the MENU button
Grid Line
Sets a grid line display to enable alignment to a structural
outline.
(Rule of 3rds Grid/Square Grid/Diag. + Square Grid/Off)
ltll Marker Display
Sets whether to display the marker on the monitor when
recording movies.
(On/Oft)
ltll Marker Settings
Sets the marker displayed on the monitor when recording
movies.
(Center/ Aspect/Safety Zone/Guideframe)
Audio Level Display
Sets Audio Level Display.
(On/Oft)
Auto Review
Sets auto review to display the captured image after shooting.
(IO Sec/5 Sec/2 Sec/Oft)
DISP Button
Sets the type of information to be displayed on the monitor or
in the viewfinder by pressing DISP on the control wheel.
(Monitor/Finder)
Peaking Level
Enhances the outline of in-focus ranges with a specific color
when focusing manually.
(High/Mid/Low/Oft)
Peaking Color
Sets the color used for the peaking function.
(Red/YelJow/White)
Exposure Set. Guide
Sets the guide displayed when exposure settings are changed
in the shooting screen.
(Off/On)
Live View Display
Sets whether to reflect settings such as exposure
compensation in screen display.
(Setting Effect ON/Setting Effect OFF)
AF Area Auto Clear
Sets whether the focus area should be displayed all the time
or disappear shortly after the focus is achieved.
(On/Oft)
E5) Pre-AF
Sets whether to perform auto focus before the shutter button
is half pressed.
(On/Oft)
Zoom Selling
Sets whether to use the Clear Image Zoom and Digital Zoom
when zooming.
(Optical zoom only/On:Clearimage Zoom/On:Digital Zoom)
E5) Eye-Start AF
Sets whether to use auto focus when you look through the
viewfinder if an LA-EA2/LA-EA4 Mount Adaptor (sold
separately) is attached.
(On/Off)
GB
40
Shooting a clear image without camera shake
Auto
Analyzes the lens information and automatically
compensates for camera shake.
Manual
Compensates for camera shake using the focal length set with
[SteadyS. Focal Len.] (Smm- 1000mm).
• Set the focal length of the lens for shooting.
Notes
• The SteadyShot function may not work optimalJy when the power has just been
turned on, right after you point the camera towards a subject, or when the shutter
button has been pressed alJ the way down without stopping halfway.
• When using a tripod, deactivate the SteadyShot function because there is a potential
for malfunction of the Steady Shot function.
• When the camera cannot obtain focal length information from the lens, the
SteadyShot function does not work correctly. Set [SteadyShot Adjust.] to [Manual]
and set [SteadyS. Focal Len.] to match the lens you are using. In this case, the
currently set SteadyShot focal length value will be displayed to the side of 11f>1.
• When using an SEL16F28 lens (sold separately) with a teleconverter, etc., set
[SteadyShot Adjust.] to [Manual] and set the focal length.
• Switching [SteadyShot] [On]/[Off] will simultaneously change the setting both in
the camera body and the lens.
• When a Jens with a SteadyShot switch is attached, the settings can be changed only
by operating the switch on the lens. You cannot change the settings on the camera.
GB
65
