[88] How to Use
Using shooting functions
Adjusting the focus
Measuring the exact distance to the subject
The
mark shows the location of the image sensor*. When you measure the exact
distance between the product and the subject, refer to the position of the horizontal line.
The distance from the lens contact surface to the image sensor is about 18 mm (23/32 in.).
*
The image sensor is the part that converts the light source to a digital signal.
Note
If the subject is closer than the minimum shooting distance of the lens, the focus cannot
be confirmed. Make sure you put enough distance between the subject and the product.
[89] How to Use
Using shooting functions
Adjusting the focus
Priority Set in AF-S
Sets whether to release the shutter even if the subject is not in focus when [Focus Mode] is
set to [Single-shot AF] or [DMF] and the subject is remaining still.
1. MENU
→
(Custom Settings
) →
[Priority Set in AF-S]
→ desired setting.
Menu item details
AF:
Prioritizes focusing. The shutter will not be released until the subject is in focus.
Release:
Prioritizes the shutter's release. The shutter will be released even if the subject is out of
